[. . . ] RADIO CASSETTE RECORDER WITH CD MASQ
RRCD 9100 PLL
ENGLISH
CARE AND SAFETY ______________________________
To ensure that this device provides you with long-term satisfaction and enjoyment, please observe the following instructions. This device is designed for the recording and playback of audio signals. Any other use is expressly prohibited.
°C
°C
2h
RADIO CASSETTE RECORDER WITH CD RR 6000 CD
OPEN/CLOSE
Protect the device, the CDs and cassettes from rain, moisture (dripping or splashing water), sand and heat. Do not insert any foreign bodies in the CD or tape compartment of the device.
RADIO CASSETTE RECORDER WITH CD RR 6000 CD
OPEN/CLOSE
VICE ! [. . . ] If the device is set to stereo reception and is receiving a mono signal, the » « display flashes.
MHz
2
Automatic station search (ASP)
By starting the automatic station search, you can delete all the existing preset stations and at the same time allocate new radio stations to them. 1 Start the automatic search in tuner mode by pressing and holding down »PROGRAM/PROG. «. After the search has finished, the station stored in position 01 can be heard. Note: The automatic station search can be interrupted with »PROGRAM/ PROG. «.
33
ENGLISH
CD MODE _________________________________________
The device is suitable for CD-DAs, CD-Rs and CD-RWs. If the device is unable to scan CDs perfectly, use a standard commercially available cleaning CD to clean the laser optics. Always keep the CD compartment closed to prevent dust from collecting on the laser optics. Keep the surfaces of CDs clean.
Selecting the CD input source
FLAT
no d ISC
CD
1
Select CD as the input source with » CD II«. If there is no CD in the compartment, the »TR 00 00:00« appears briefly, and then »no d ISC«. Display: »OPEn « flashes, then »OPEn « . Insert a CD in the compartment with its label facing upwards.
message
FLAT
2
OPEn
CD
3 4
FLAT TR
CD
12
58:14
Close the lid of the CD compartment with » « on the device. »58:14«, appear in the display.
CD playback
1
FLAT TR
CD
01
01:22
2
Press »CD II« to start playback. Display: » «, the current track number and the elapsed playing time of the track. To resume playback, press » To stop playback, press »7 «. II«.
FLAT TR
CD
II
01
01:36
3 4
Repeating the current track
1 Press »5a« briefly during playback. The track is repeated from the beginning.
Selecting a different track
1 During playback, keep pressing »5a« or »s « until the number of 6 the track you want to hear appears in the display. Playback of the selected track starts automatically.
34
CD MODE _____________________________________________
Searching for a passage within a track
1 During playback, press »5a« or »s « and hold it down until you 6 find the passage you want to hear. When »5a« or »s « are released, playback begins. 6 Note: During the search the volume is reduced.
Calling up the REPEAT functions
REPEAT 1 TR
CD
POP
The repeat functions enable you to repeat a single track or the whole CD. »REPEAT 1« appears in the display and the current track is continuously repeated. »REPEAT ALL« appears in the display and the CD is continuously repeated. To quit the functions, press »REPEAT« again.
06 02:14
POP
REPEAT ALL TR
CD
2
03 01:45
3
Playing the introductions of tracks on the CD
FLAT TR
CD
INTRO
1
03 00:05
2
Press »INTRO« when the CD is in the STOP position. Playback starts automatically, and the first ten seconds of each track are played. [. . . ] 8 x 1. 5 Volt (R20, UM1, D)
Tape unit
Recording medium:. . . . . . . . Compact cassette according to DIN 45516 Track position: International quarter-track Tape speed: . . . . . . . . . . . . . . . . . . . . . . 0. 25 %
Output:
DIN 45324, 10% THD Music signal power: . . . . . . . . . . . . . . . . . 2 x 5 W Stereo headphone jack 3, 5 mm ø
Radio unit Frequency bands
FM 87. 5 . . . 108. 0 MHz MW 522 . . . 502 x 215 x 313 mm Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6. 1 kg
CD unit
Technical and optical modifications reserved
41
ENGLISH
Frequency response: . . . . [. . . ]