[. . . ] Enclosure Overview HD0 HD1 Addonics TECHNOLOGIES HD2 HD3 HD4 Locking Mechanism Power LED Compact RAID CPR5SA HD0 ­ HD4 Button Functions: A. [. . . ] Power switch: press button over 2 seconds Reset Device / Change Mode button a. Change Mode: press button over 2 seconds Technical Support B. Phone: Hours: Email: 408-453-6212 8:30 am - 6:00 pm PST http://www. addonics. com/support/query/ RAID Setting DIP switch Reset Device / Change Mode button Power switch / Buzzer disable button II. Using the onboard RAID DIP switch DIP Switch 2 ON ON OFF OFF ON ON OFF OFF RAID Status RAID 0 (stripped) RAID 10 JBOD (Large) RAID 3 Clone RAID 5 RESERVED Normal (Individual drives) 1 ON ON ON ON OFF OFF OFF OFF 3 ON OFF ON OFF ON OFF ON OFF Power connector eSATA connection Installation Guide 1. Using the provided eSATA to eSATA cable, connect one end to the eSATA port on the RAID box and the other end to the eSATA controller card. Navigate to the Disk Management utility to configure the drives. Note: for the system to detect multiple individual drives, the RAID box must be connected to a port multiplier compatible eSATA host controller. If the RAID box is NOT connected to a port multiplier compatible eSATA host controller, the system will only detect one drive and that is the hard drive in slot HD0. RAID Monitoring LED RAID Status RAID 10 Two Options for Setting RAID on the Compact RAID Box (only select one option) I. Using the JMicron HW RAID Manager utility program For Windows users, install the JMicron HW RAID Manager located on the SATA Controller CD. [. . . ] RAID 3 RAID 5 Clone JBOD (Large) RAID 0 LED Indicator Access Rebuilding Access Rebuilding Access Rebuilding Access Clone Access Access Blue / Flash Blue & Red / Flash Blue / Flash Blue & Red / Flash Blue / Flash Blue & Red / Flash Blue / Flash Blue & Red / Flash Blue / Flash Blue / Flash [. . . ]