[. . . ] TE 2-A
Operating instructions Mode d'emploi Manual de instrucciones en fr es
304444
*304444*
1
9
1
2
34 5 8
6
7
UL listed and CSA certified according to US and Canadian safety standards Homologué (conforme aux normes de sécurité américaines et canadiennes) Producto homologado según normas de seguridad americanas y canadienses Produto homologado de accordo com as normas de segurança americanas e canadianas
C
US
C
US
TE2-A cordless rotary hammer
It is essential that the operating instructions are read before the tool is operated for the first time. Ensure that the operating instructions are with the tool when it is given to other persons.
1. General information
1. 1 Signal words and their meaning -WARNINGThe word WARNING is used to draw attention to a potentially dangerous situation which could lead to severe personal injury or death. -CAUTIONUsed to draw attention to a potentially dangerous situation which could lead to minor personal injury or damage to the equipment or other property. [. . . ] This personnel must be informed of any special hazards that may be encountered.
3. 4 Personal protective equipment The operator and other persons in the immediate vicinity must always wear eye protection, ear protection and breathing protection while the tool is in use.
3. 2. 3 Thermal hazards
Wear eye protection
Wear ear protection
Wear breathing protection
Wear protective gloves
The insert tool may become hot during use. You should therefore wear protective gloves when changing insert tools.
3. 5 Symbols used on the tool V = volts j = direct current --= no load speed no min1 = revolutions per minute
= hammer drilling = rotation only = diameter
4. Functional description
The TE 2-A is a cordless rotary hammer for professional use. Its ergonomically designed rubber-padded grip reduces fatigue and provides a secure hold. The items supplied include: - The electric tool - B24/2. 0 NiCd, B24/2. 4 NiCd or B24/3. 0 NiMH battery - C 7/24 or C 7/36-ACS charger - Operating instructions - Toolbox or cardboard box 4. 1 Use of the tool as directed The TE 2-A is a hand-held cordless rotary hammer for driving and removing screws, drilling in steel, wood and masonry and hammer drilling in concrete and mason4 ry. It is intended for use on construction sites of all kinds for general construction, interior finishing, conversion and renovation work. Use only the insert tools and accessories intended for use with this tool. The batteries are to be used exclusively to power tools of the Hilti 24V line. Use only the recommended battery charger.
Modification or manipulation of the tool other than described in these operating instructions is not permissible. To avoid the risk of injury, use only original Hilti accessories and additional equipment. It is essential that the safety precautions printed in these operating instructions are read and observed. It is essential that a new battery is charged correctly when charged for the first time before initial use. Incorrect initial charging can lead to a permanent reduction of battery capacity. With the C 7/24 charger: Charge for 24 hours in normal charging mode or for 12 hours in conditioning mode. With the C 7/36-ACS charger: The charger detects automatically whether initial charging or normal charging is necessary. -NOTEThe tool may be used only with B24/2. 0 NiCd, B24/2. 4 NiCd or B24/3. 0 NiMH batteries. Batteries should be stored at room temperature.
6. 1 Fitting the side handle (option) -NOTEAn adjustable side handle (option) may be fitted in addition to the two integrated grips. The side handle permits the tool to be held more securely and thus more comfortably, particularly in the event of inadvertently drilling into a reinforcing bar. Slacken the side handle clamping band by turning the side handle in a counterclockwise direction. Slide the side handle clamping band over the chuck and onto the front section of the tool. Operation
-CAUTION
Noise is emitted by the tool and the drilling or screwdriving procedure. -CAUTION-
7. 2 Screwdriving using the bit adaptor 1. Insert the bit adaptor with TE-C connection end in the chuck and lock the chuck. [. . . ] Charge the battery using conditioning mode (see battery charger operating instructions). Warranty
Hilti warrants that the tool supplied is free of defects in material and workmanship. This warranty is valid so long as the tool is operated and handled correctly, cleaned and serviced properly and in accordance with the Hilti Operating Instructions, all warranty claims are made within 12 months from the date of the sale (invoice date), and the technical system is maintained. This means that only original Hilti consumables, components and spare parts may be used in the tool. [. . . ]