[. . . ] Cut - Click Cut to cut the currently selected text of the channel name to the clipboard. Copy - The Copy button copies the currently selected text to the clipboard. Zoom group Panel - Click Panel to automatically scale the virtual panel to fit the main window. [. . . ] Zoom group Panel - Click Panel to automatically scale the virtual panel to fit the main window. Mode - Toggle Zoom Mode ­ When in zoom mode, the cursor changes to a magnifying glass. Left click on the virtual panel to zoom in at the cursor, right click to zoom out. Panels group Virtual - Click Virtual to automatically scale the virtual panel to fit the main window. Right - In Si2 and Si3 virtual consoles, clicking Right zooms into the right bay. Config group Modules ­ Displays the I/O Module Configuration panel, allowing addition, editing and deleting of I/O Modules. The CONFIG window allows the user to add and set-up `virtual' cards that may be used in a show. Right click on the MODULES button to open the window: Right Click on an empty slot to bring up a dialogue box allowing an option card to be selected. . . Cont. . . The names of the card (in green) can be edited to help give meaning to the card or application. These names will then be used on the console touch screen. When a card is added, the system will patch all of the Output Slot Outputs to all cards (enabling all cards to `listen' to anything routed to the expansion slot) ­ these are outputs from the SI System. These outputs can be disabled by `clicking' the output range box. On a page containing a list, use the up and down cursor keys to move between items. Use the [UP] and [DOWN] cursor keys to move within the popup menu, then [F2] again to select. In a freeform text box such as the channel rename page, simply type a channel name, then press [ENTER] to save. Operation Note: In the following list, virtual console keys are simply named e. g. 48V, whereas physical PC keys and mouse buttons are denoted with square brackets e. g. [LEFT CTRL] * To toggle an encoder: Press [LEFT CTRL] + [LEFT MOUSE] Note: Encoder ON light will light or extinguish as appropriate. * To toggle an encoder bus send level: Press [LEFT CTRL] + hold [LEFT MOUSE] Note: When in Bus Send mode, toggles bus send level between -infinity and 0dB. * To change an enc aux mode: Press AUX PRE + [LEFT CTRL] + [LEFT MOUSE] Note: Click the AUX PRE button so that it lights up, then hold down the left control key and click on the encoder. 48V: Hold [LEFT MOUSE] + 48V Note: SEL buttons on all channels that have 48V set will light. * To enter interrogate mode e. g. [. . . ] * To change an enc aux mode: Press AUX PRE + [LEFT CTRL] + [LEFT MOUSE] Note: Click the AUX PRE button so that it lights up, then hold down the left control key and click on the encoder. 48V: Hold [LEFT MOUSE] + 48V Note: SEL buttons on all channels that have 48V set will light. * To enter interrogate mode e. g. 48V: Press [LEFT SHIFT] + [LEFT MOUSE] + 48V Note: SEL buttons on all channels that have 48V set will light, clicking on other channel SELs will toggle 48V on those channels. [. . . ]