[. . . ] MPEG4/MJPEG Network Camera Quick Installation Guide 1 Getting Started Package Contents Check the items contained in the package carefully. [. . . ] Once connected, the Link LED starts flashing green light and the camera is on standby and ready for use now. Connecting the Ethernet Cable -3- Connecting the Camera to WLAN If you use a wireless network in your application environment, you need to attach the included external antenna to the camera. When the camera is powered on, the camera will automatically search any access point with "default" SSID. Connecting the External Antenna NOTE If the camera cannot to your wireless network, you need to install the camera in LAN and proceed with WLAN settings. -4- 3 Accessing the Camera Using IP Finder 1. Insert the Installation CD-ROM into your computer's CD-ROM drive to initiate the Auto-Run program. The control panel will appear as below. Display the connected camera(s) Click Search to find the IP address of the connected camera(s). Once you get the IP address of the camera, launch the Web browser or Ultra View to access your camera. TIP The Installation CD-ROM provides a setup program that allows you to install IP Finder on your computer. To install IP Finder, click Install Software then select IP Finder on the Auto-Run screen. Open the Web browser on your computer (for example, Microsoft Internet Explorer in this guide) 2. [. . . ] If you have any problem on the product(s), please contact your local authorized dealer. -8- [. . . ]