[. . . ] MUTE Key The Mute key operates the same function it did on your orginal remote control. Also, if your original remote control required that you press an "OK" or "ENTER" key during Menu operation, the Mute key can be used for this function. Volume +/- Keys These keys operate in the same way as the keys on your original remote. If available on your original remote, these keys will allow you to navigate through the menu. [. . . ] Teletext and Fastext Keys The text keys are used to access the Teletext functions of your television. On some televisions, this may be done by pressing the TEXT ON key several times. By pressing again, you can see the bottom half of the Teletext page enlarged. To return to regular Teletext viewing, press the EXPAND key again, or press the TEXT ON key, depending on your television. After accessing the text mode, the bottom row of the keys marked red, green, yellow and blue, allow you to access the Fastext functions of your television. If on your original remote control these keys are used for Menu navigation, the ONE FOR ALL Fastext keys may operate in the same way. Important note: For a more detailed explanation of Teletext and Fastext, please refer to the manual of your television. Remember, different televisions control Teletext and Fastext features in different ways. Not all of the Teletext functions may be available for your particular model. Remember to keep pointing the ONE FOR ALL at your Television while pressing this key. important note: - Most TV's do not switch on pressing the POWER key. Please try pressing a "number" key or the "TV-text off" key to switch your TV back on. Once you have Set-Up your ONE FOR ALL, you can blink back your SET-UP CODE for future reference. Press and hold MAGIC until the red light blinks twice (The red light will blink once and then twice). For the first digit of your four-digit code, press 1 and count all the red blinks. Write down the code for your device in the boxes below and in the battery compartment for quick and easy reference. Try repeating the Direct Set-Up using another code listed under your brand or start the search method over again to locate the proper code. Enter the programme number exactly as you would on your original remote. [. . . ] Enter the programme number exactly as you would on your original remote. Make sure you are using new batteries and are aiming the one for all at your device. Replace batteries with 2 fresh, new "AA" alkaline batteries. If you still have questions about the operation of your ONE FOR ALL 1 universal remote and could not find the answer(s) in the TroubleShooting section, you may want to contact the customer service department for assistance. [. . . ]