[. . . ] Safety Instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 4. Connecting the clock _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5 5. Controls _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 6 6. [. . . ] a) To avoid risks of electrical shock: · Make sure that the power cord never becomes wet or damp during operation. If the mains cable is damaged, get it replaced by the customer service, before using the instrument again. · Make sure that fluids or any other objects do not get inside the device. 5 b) To avoid risks of fire and injuries: · Set up the appliance in an open and well-ventilated area, so that there are no heat pockets. · Do not allow children or elderly persons to play with the appliance unsupervised, as they are not always able to assess the possible dangers correctly. c) Electromagnetic fields This device does not cross the permissible limits of electro smog within the casing. However, if you still have doubts about installing it in the bedroom: · You will be quite safe if you place the appliance about half a meter from the bed. At this distance, there will be no effect even on persons sensitive to electromagnetic fields. t 4. Connection Before operating the device, make sure that it is in perfect condition. Open the battery compartment at the back or underneath, and insert a 9V battery pack. Select a socket which is accessible at any time, so that the plug can be quickly pulled out in case of any problem. 6 5. Controls t TUNING FM/AM (Band selector) VOLUME (volume control) SLEEP (Sleep timer) ALARM OFF ALARM (alarm) SNOOZE MIN (LED display) HOUR (LED display) µ TIME (LED display) ¸ Function switch ON OFF AUTO BUZZ ¹ Projection On/Off FOCUS (for projection) HOUR (Projection display) MIN (Projection display) TIME (Projection display) 6. Setting the clock Separate settings must be made in the clock for the LED and projection displays. a) LED display µ While you keep the TIME key pressed: Press the HOUR key to set the hours. b) Projection display ¹ Place the PROJECTION switch in the ON position to switch on the projection display. In case of poor lighting, direct the projection beam against a wall or a similar surface. Adjust the sharpness of the projection display by rotating the small FOCUS wheel. Note: the display is visible only in darkness at a distance of more than approx. on the ceiling). 7 If you can see the time display on the projected area clearly. . . [. . . ] Sleep timer If you would like to listen to the radio for a while before going to sleep and would like the radio to switch off by itself: press the SLEEP key. The radio will remain on for 59 min. keep the SLEEP key pressed and simultaneously adjust the remaining time with the key. Old batteries should not be disposed off with the household waste: Give old batteries back to your dealer or keep them in an appropriate place for disposal. [. . . ]