[. . . ] FMW43PR1 Mini-Dock
User's Guide
Stylistic LT Series
This mini-dock is designed to extend the connectivity of your pen tablet by providing a number of ports that are not available on the system. [. . . ] Mini-Dock peripheral Interfaces
Fujitsu is a registered trademark of Fujitsu Ltd. © 2000 Fujitsu PC Corporation
8/00
Page 1 of 2
58-0737-00B
The viewing angle of the mini-dock can be adjusted to four different positions. The bottom of the support bail on the rear of the support platform (see Figure 3). When storing the mini-dock, flip the bail up against the back of the support platform to allow the platform to lie flat.
Installing the System into the Mini-Dock
Cautions
· Dropping conductive material onto the charging contacts could result in internal damage to the pen tablet circuitry. · Prior to installing your pen tablet into the mini-dock, be sure to power down your system first. Failure to do so could result in damage to the system or the mini-dock.
0
AC Adapter Port
1. Position the pen tablet against the positioning guide and the back of the mini-dock. Slide the pen tablet into the tray at the bottom of the mini-dock and press it down firmly until it is seated, as shown in Figure 4. [. . . ] © 2000 Fujitsu PC Corporation
8/00
Page 2 of 2
58-0737-00B [. . . ]