[. . . ] Offering several levels of security, the TPL-110AP is built with 128-bit WEP encryption and 802. 11i (WPA / TKIP, AES, PSK) for the wireless pass-through and 56-bit DES encryption for the Power line pass-through There are also some Enhanced Security Management Functions: Wireless/Wired 802. 1x, and Embedded RADIUS Server so your data will always be secured--guaranteed. The TRENDNET TPL-110AP Home Plug + Wireless 11g Access Point has the latest IEEE 802. 11g spec, which provide data rate at 54Mbps. [. . . ] In the SSID field, type in the following: default (This is case sensitive) 5. Note: If you are using Windows XP you will not need to configure the PCMCIA card because Windows XP has an auto sense function included in the operating system. TPL-110AP Setup Guide You will need to temporarily change the IP address of your PC/laptop to setup your TPL-110AP. Note: If you have not changed the default Powerline password (HomePlug) or you get the same subnet (10. 0. 0. 1/16) on your network then there is no need to continue this setup. - Win 2000: Click on Start, Settings, then Network, and Dial-up Connections. Click OK to close the Network panel and the changes will take effect when this panel is closed. 1. The basic information screen should now appear in the browser window. 4. If your existing HomePlug password is different, change this password accordingly. Setting up the IP address on the TPL-110AP 1. You can change this IP address to matches your network configuration (Example: 192. 168. 1. 10) 3. At this point, you will need to change the PCs IP address back to it's original settings. - Win 2000: Click on Start, Settings, then Network and Dial-up Connections. Right click on Local Area Connection and then select Properties. 3. Select Internet Protocol (TCP/IP) and then click on Properties. 8 4. [. . . ] TRENDware shall not be responsible for any software, firmware, information, or memory data of customer contained in, stored on, or integrated with any products returned to TRENDware pursuant to any warranty. THIS DISCLAIMER OF LIABILITY FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE. [. . . ]