[. . . ] ADDONICS TECHNOLOGIES Model: AAESP35MK, AAESPSPCI Installation Guide 4-pin floppy power connector SATA port USB 5-pin header 4-pin floppy power connector SATA port USB 5-pin header eSATAp port Power LED eSATAp port Screw holes Power LED 1. [. . . ] Note: For the Hybrid Port converter to support hot swapping, it needs to be connected to an onboard or add-in SATA controller card that supports hot swapping. Connect one end of the USB 5-pin header cable to the motherboard and the other end to the Hybrid Port converter. PCI bracket 1. For mounting the Hybrid Port converter on a PCI, screw the provided PCI bracket to the SCSI1 bracket. To provide power, connect a 4-pin floppy power cable from the power supply to the 4-pin floppy power connector on the converter. Using a SATA data cable, connect one end to an onboard or add-in SATA controller card to the SATA port of the Hybrid Port converter. Note: For the Hybrid Port converter to support hot swapping, it needs to be connected to an onboard or add-in SATA controller card that supports hot swapping. TECHNICAL SUPPORT Email: Internet: http://www. addonics. com/sales/query/ http://www. addonics. com 4. [. . . ] Connect one end of the USB 5-pin header cable to the motherboard and the other end to the Hybrid Port converter. Technical Support (8:30 am to 6:00 pm PST) Phone: 408 453-6212 Email: http://www. addonics. com/support/query/ [. . . ]