[. . . ] 3) Personal safety a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. [. . . ] Carrying power tools with your finger on the On/Off switch can lead to accidents. In case of damage and improper use of the battery, vapours may be emitted. When the battery is defective, liquid can escape and come into contact with adjacent components. penetration of water in the battery charger increases the risk of an electric shock. The battery charger is suitable only for charging Bosch lithium ion batteries within the listed voltage range. Have repairs performed only by a qualified technician and only using original spare parts. damaged battery chargers , cables and plugs increase the risk of an electric shock. The heating of the battery charger during the charging process can pose a fire hazard. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. 1 2 3 4 5 6 7 8 9 On/Off switch Lock-off button for On/Off switch Blade guard Blade screw Blade Guide edge Battery charge-control indicator Socket for charge plug Plug connector for charger Typically the A-weighted sound pressure level of the product is 66, 5 dB(A). Cordless Universal Cutter Article number ­ Xeo ­ Battery Charger ­ Battery charger, UK version Rated voltage No-load speed Cutting capacity/charged battery (6 mm carpet, enforced) approx. We declare under our sole responsibility that the product described under "Technical Data" is in conformity with the following standards or standardization documents: EN 60745 (battery powered products) and EN 60335 (battery chargers) according to the provisions of the directives 89/336/EEC, 98/37/EC (until Dec. When the battery is empty, the machine is switched off by means of a protective circuit: The inserted tool no longer rotates. Do not continue to press the On/Off switch after the machine has been automatically switched off. To ensure full capacity of the battery, completely charge the battery in the battery charger before using your power tool for the first time. A battery that is new or has not been used for a longer period does not develop its full capacity until after approx. When the battery charge-control indicator 7 lights up red while the On/Off switch 1 is pressed, then the battery has less than 30% of its capacity and should be charged. ⷠPlug the mains plug of the battery charger into a socket outlet and the charger plug 9 into the socket 8 on the rear side of the handle. Disconnect the battery charger from the mains supply when not using it for longer periods. Attach the new blade onto the tool holder ensuring that the ground edges of the blade face you. When the machine is running, the lock-off button can be released again. ⷠTo switch off the machine, release the On/Off switch 1. [. . . ] Exploded views and information on spare parts can also be found under: www. Com Our customer consultants answer your questions concerning best buy, application and adjustment of products and accessories. Only for EC countries: Do not dispose of power tools into household waste!According the European Guideline 2002/96/EC for Waste Electrical and Electronic Equipment and its implementation into national right, power tools that are no longer usable must be collected separately and disposed of in an environmentally correct manner. [. . . ]