[. . . ] VB-CMS/CS 50 Bench dimensions, outer 773 m x 481 mm (width x length) Bench height with foldaway legs without foldaway legs Weight 900 mm 180 mm 11, 3 kg Adjust the height of the VB-CMS/CS 50 on both sides using the screws [3-1] to the CMS-GE/CS 50 EB. [. . . ] If not: Position the pre-set profile setting rail so that it makes equal contact with the saw table and the table widener. REACh for Festool products, its accessories and consumable materials: REACh is a European Chemical Directive that came into effect in 2007. As "downstream users" and product manufacturers, we are aware of our duty to provide our customers with information. We have set up the following website to keep you updated with all the latest news and provide you with information on all the materials used in our existing products: www. When the widener VB-CMS/CS 50 is fitted (on the right or left side of the bench), the saw table of the CS 50 EB or the basic unit CMS-GE is widened by 481 mm. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. â­ Position the bench on a stable , level , horizontal surface. If the bench slides or wobbles, it may not be possible to control the power tool safely and reliably. [. . . ] To fold out the legs [1-2] open the two rotary knobs [1-1] to the stop. [. . . ]