[. . . ] Assembly Instructions for: HTB Terminal Exe IIC Gb Terminal cap tightening torque: 1 to 2 Nm Operating temperature range -60°C +100°C International Assembly Instructions AI 388 / Issue A - 10/09 Certification Details Product Type: HTB Terminal Baseefa08ATEX0266U II 2G Exe IIC Gb IECEx BAS08. 0085U Table 1 Max. [. . . ] Conductors of different sizes and configurations shall not be inserted into the same terminal throat/slot except for the specific combinations listed in Tables 1 & 2. When installed in an enclosure the creepage and clearance distances between the terminals, adjacent equipment and enclosure walls must comply with the requirements of IEC/EN 60079-7. When installed in plastic enclosures, there shall be at least 3mm clearance between the inside of the removable cover/lid of the enclosure and the terminal screws after the connections have been made and the terminal screws and cover/lid have been fully tightened down. For conductor sizes less than 1mm² but not less than 0. 5mm², the maximum current rating shall not exceed 1 amp. The service temperature range must not exceed -60°C to +100°C. Table 2 Alternatively, the following PAIRS of conductor combinations may be fitted in one terminal 1. 5mm² solid with: 1. 5mm² stranded with: 2. 5mm² solid with: 2. 5mm² stranded with: 4mm² stranded with: 6mm² stranded with: 10mm² stranded with: 1. 5mm² solid or 2. 5mm² stranded or 4mm² stranded or 6mm² stranded or 10mm² stranded 0. 9mm² stranded or 1. 2mm² stranded or 1. 5mm² stranded or 2. 2mm² or 2. 5mm² stranded or 4mm² stranded or 6mm² stranded or 10mm² stranded. 0. 9mm² stranded or 1. 2mm² stranded or 2. 2mm² solid or 2. 5mm² solid or 4mm² solid or 6mm² stranded or 10mm² stranded 2. 5mm² stranded or 4mm² stranded or 6mm² stranded or 10mm² stranded 4mm² stranded or 6mm² stranded or 10mm² stranded 6mm² stranded or 10mm² stranded 10mm² stranded 2) 3) 4) 5) 6) 7) Alternatively, the following THREE of conductor combinations may be fitted in one terminal Two 2. 5mm² solid conductors and one 6mm² stranded conductor Hawke International UK Office Oxford Street West, Ashton-Under-Lyne, Lancashire OL7 0NA. [. . . ] Registered Office: Mitre House, 160 Aldersgate Street, London EC1A 4DD. [. . . ]