[. . . ] Mechanical Anchoring Systems 4. 3. 10 HCI-WF/MD Cast-In Anchor 4. 3. 10. 4 Installation Instructions Installation Procedure for HCI-MD 1. [. . . ] By stepping on the head of the anchor (or by using a hammer), push it through the hole until the anchor plastic sleeve snaps into place (i. e. After the concrete has properly cured and achieved its design compressive strength, install the threaded rod, ensuring full thread engagement. (Note: Rod may be installed prior to concrete pour, but should not be loaded or disturbed until concrete has cured and achieved its design compressive strength . Installation Procedure for HCI-WF 1. Prior to pouring the concrete over the wood form, place the anchor (nails down) on the surface of the wood form. 2, 3. After the concrete has properly cured and reached its design compressive strength, install the threaded rod, ensuring full thread engagement. 4. 3. 10. 5 Ordering Information HCI ­ WF Cast ­ In Anchor for use in Wooden Form Description Packaging Content Item No. Color Identification Decals for use with HCI ­ WF Description Packaging Content Item No. HCI ­ WF 1/4" HCI ­ WF 3/8" HCI ­ WF 1/2" HCI ­ WF 5/8" HCI ­ WF 3/4" 150 150 100 100 100 00282907 00282908 00282909 00285927 00285928 HCI ­ WFID Decal Color: Blue HCI ­ WFID Decal Color: Green 300 300 00284256 00284257 HCI ­ MD Cast ­ In Anchor for use in Metal Deck & Accessories Description Packaging Content Hole Saw Item No. Arbor Item No. HCI ­ MD 1/4" HCI ­ MD 3/8" HCI ­ MD 1/2" HCI ­ MD 5/8" HCI ­ MD 3/4" 100 100 60 60 60 00282910 00282911 00285929 00282912 00285930 7/8" 7/8" 1-3/16" 1-3/16" 1-1/4" 00283131 00283131 003001812 003001812 00283134 00283124 00283124 00283124 00283124 00283126 Color Identification Decals for use with HCI ­ MD Description Packaging Content Item No. HCI ­ MDID Decal Color: Blue HCI ­ MDID Decal Color: Green 300 300 00284258 00284259 260 Hilti, Inc. [. . . ] (US) 1-800-879-8000 | www. us. hilti. com I en español 1-800-879-5000 I Hilti (Canada) Corp. [. . . ]