[. . . ] Keep these operating instructions in a safe place and pass them on to any future user.
~ Before installation or service,
disconnect the power supply to the work area by unplugging the unit, "tripping" the circuit breaker or removing the fuse.
~ Do not use an extension cord to
connect this appliance to electricity. Extension cords do not guarantee the required safety of the appliance (e. g. , danger of overheating).
~ Be certain your appliance is
properly installed and grounded by a qualified technician. To guarantee the electrical safety of this appliance continuity must exist between the appliance and an effective grounding system. If there is any doubt, have the electrical system of the house checked by a qualified electrician.
~ Only connect power to the
appliance when all installation and plumbing work is complete.
4
IMPORTANT SAFETY INSTRUCTIONS
Installation
This appliance is top-heavy and must be secured to prevent the possibility of tipping forward. [. . . ] Repairs should only be carried out by a qualified and trained person in strict accordance with local and national safety regulations. Unauthorized repairs could cause personal injury or machine damage and may void the warranty. Possible fault Solution
The machine is not turned Check whether the appliance is on. This makes the compressor run longer, causing the temperature to fall automatically. Operating the appliance in a room that is too cold will cause the cooling system to switch off for too long, causing the freezer section to become too warm.
The temperature in Select a warmer the freezer is too temperature. The room temperature is lower than the ambient temperature for which the appliance is designed.
34
Frequently asked questions
General problems Issue Possible fault Solution
Water is flowing out of Close the shut-off valve immediately. Check whether the water Contact Miele Technical pipe in the appliance is Service. Contact a plumber.
Check whether the correct Self-tapping valves and water valve has been 3/16" (4. 76 mm) saddle installed. opening and closing the door too many times in succession prevents it from opening. The compressor kicks The ventilation slits are on very frequently and covered or dusty. The door has been opened too frequently, or a large amount of unfrozen food has been put in at once for freezing. Clicking sounds are made when the thermostat switches the compressor on and off. On multi-zone and frost-free appliances you can sometimes just hear the movement of air circulating inside the appliance. Realign the appliance using a level, by raising or lowering the screw feet underneath the appliance. The noise of the compressor and the coolant circulating in the system is unavoidable.
Blubb, blubb. . . .
Click. . . .
Sssrrrrr. . . .
Rattling, vibrating
The appliance is touching Move it away. The transport cable clips are hanging loose at the back of the appliance. Separate them.
Remove the clips.
40
After sales service
In the event of a fault which you cannot easily fix yourself, please contact the Miele Technical Service Department at the address on the back of this booklet. When contacting the Technical Service Department, please quote the model and serial number of your appliance given on the data plate inside the appliance.
MieleCare
(USA only) MieleCare, our Extended Service Contract program; gives you the assurance of knowing that your appliance investment is covered by 5 years of worry-free ownership. MieleCare is the only Extended Service Contract in the industry that guarantees repairs by a Miele Authorized Service Provider using genuine Miele parts. Only genuine Miele parts installed by factory-trained professionals can guarantee the safety, reliability and longevity of your Miele appliance. Please note that unless expressly approved in writing by the Miele Service department, Extended Service Contracts offered by other providers for Miele products will not be recognized by Miele. Our goal is to prevent unauthorized (and untrained) service personnel from working on your Miele products, possibly doing further damage to them, you and/or your home. [. . . ] If you are in any doubt as to whether the appliance has been properly grounded, have the appliance checked by a qualified electrician or service technician. Installation, repairs and other work by unqualified persons could be dangerous. Before installing the appliance, verify that the voltage, load and circuit rating information found on the data plate match the household electrical supply. If there are any questions regarding the electrical connection of this appliance to the power supply, please consult a licensed electrician or call the Miele Technical Service. [. . . ]