[. . . ] Do not operate heater with a damaged cord or plug or after the heater malfunctions, has been dropped or damaged in any manner. It must be changed by a qualified electrician or the manufacturer to avoid any danger 7. Always close the power switch and unplug power cord before servicing or moving the heater. Always place the heater on a stable, flat, level surface when operating, to avoid the chance of the heater overturning. [. . . ] Always place the heater on a stable, flat, level surface when operating, to avoid the chance of the heater overturning. Locate the power cord so the heater or other objects are not resting on it. Arrange power cord away from room traffic and where it will not be tripped over. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes and curtains at least 0. It must not be used in potentially dangerous locations such as flammable, explosive, chemicalladen or wet atmosphere. Never locate a heater where it may fall into a bathtub or other water container. Avoid any items that might block the transmission of heat, such as curtains, niches or radiator covers. Do not install the appliance right underneath a fixed electric socket. The appliance's power cord must not be left on top of the actual unit while it is in operation. The appliance should be located so that the plug is completely accessible. Pilot lamp: This lamp lights on to indicate that the unit is producing heat, and it lights off when the appliance is no longer producing heat. Switch: This knob is used to turn the unit ON/OFF and to select one of two heating power levels (low or high). It has three positions: Position 0 means OFF; Position 1: low speed for heating; Position 2: high speed for heating. Thermostat: The thermostat is the device that regulates the room temperature that you have selected. Once the desired temperature has been obtained, slowly turn the thermostat control in the opposite direction (left) until the pilot lamp lights off. Keeping it in this position the appliance itself will automatically regulate the selected room temperature. Maintenance: Whenever the appliance is to be handled, the plug should be removed from the electrical socket with the switch in OFF position: 0 and never by pulling the power cord. Cleaning: Always unplug & switch off the appliance before all operations. Do not use any kind of detergents or chemical based cleaners on the unit as it may damage the body. To benefit from the warranty, please return the device to your dealer with POSTAGE PAID along with the document of purchase proof specifying the date of purchase. [. . . ] Do not use any kind of detergents or chemical based cleaners on the unit as it may damage the body. To benefit from the warranty, please return the device to your dealer with POSTAGE PAID along with the document of purchase proof specifying the date of purchase. If not using for a long time, please clean the surface of the appliance and put it into the original packing. Keep it in an airy place and pay attention to avoid dampness and clash. [. . . ]