[. . . ] Multimedia Plasma Monitor
MODEL
PDP42H2W
Owner's Manual
TO THE OWNER
Before operating this Plasma Monitor, read this manual thoroughly and operate the Plasma Monitor properly. Operating the Plasma Monitor properly enables you to manage those features and maintains it in better condition for a considerable time. Improper operation may result in not only shortening the product-life, but also malfunctions, fire hazard, or other accidents. If your Plasma Monitor seems to operate improperly, read this manual again, check operations and cable connections and try the solutions in the "Trouble-shooting" section of the end of this booklet. [. . . ] Adjust each value by pressing the 7 8 buttons.
MENU
Picture adjustment
Contrast Brightness Color Tint Sharpness Noise reduction
62 32 32 0 0 Off
NOTE : The adjusted Video and Computer values are memorized individually. Noise reduction cannot be adjusted when the input mode is "PC" or "DVI-D".
78
Select
OK
OK
STATUS Return
M E N U Exit
Select the item and then press the OK button.
Picture adjustment
Contrast
63
78
Select
78
Adjust
STATUS Return
M E N U Exit
Contrast Press the 7 button to decrease contrast, and the 8 button to increase contrast.
Contrast 63
Brightness Press the 7 button to adjust image darker, and the 8 button to adjust brighter.
Brightness 31
Color Press the 7 button to lighter color, and the 8 button to darker color.
Color 31
Tint Press the 7 or 8 button to obtain proper color.
Tint 0
Sharpness Press the 7 button to soften the image, and the 8 button to sharpen the image.
Sharpness 8
Noise reduction Press the 7 or 8 button to select "On" or "Off".
Noise reduction On
26
BASIC OPERATION
SOUND ADJUSTMENT
VOLUME
Press the VOLUME (+/) button(s) on the Remote Control Unit or the Front Control to adjust volume. Press the VOLUME (+) button to increase volume, and () button to decrease.
(green) Indicates the roughly level of volume.
9
MUTE
Press the MUTE button on the Remote Control Unit to mute sound. To restore sound to its previous level, press the MUTE button again or press the Volume (+/) button(s).
Mute 9
(red)
VIDEO COMPONENT ON-OFF
SURROUND
Press the SURROUND button on the Remote Control Unit to set the 3D surround function on/off.
PC/DVI-D
VOLUME
VOLUME button
WIDE OFF TIMER MUTE PICTURE MOVE UP
MUTE button
OK
STATUS MOVE DOWN MENU
SURROUND button
SURROUND
AUTO PC O
POWER ON
SOUND ADJUSTMENT
SOUND MENU
Sound adjustment
1 2 3
Press the MENU button and the On-Screen Menu will appear. Press the ed buttons to select "Sound" menu and then press the OK button. Press the ed buttons to select an item that you want to adjust and make adjustment by pressing the 78 buttons.
Treble Bass Balance BBE
0 0 0 Off
78
Select
78
Adjust
STATUS Return
M E N U Exit
Treble Press the 7 button to decrease high frequency sound, and the 8 button to increase high frequency sound. Bass Press the 7 button to decrease low frequency sound, and the 8 button to increase low frequency sound. Balance Adjusts the volume balance of the left and right speakers.
R
BBE 3D SURROUND 9
The on-screen display when BBE is set "On" or "Bass" and Surround "On".
Mach3Bass
BBE Set "On" to provide "BBE-ON" sound, and set "Bass" to provide "BBE Mach 3 Bass-ON" sound. BBE and BBE symbol are registered trademarks of BBE Sound.
27
BASIC OPERATION
SCREEN ADJUSTMENT
ADJUSTING WIDE IMAGE
SCREEN ADJUST MENU
Screen adjustment
1 2 3
Press the MENU button and the On-Screen Menu will appear.
Press the ed buttons to select "Screen adjustment" menu and then press the OK button. Press the ed buttons to select "Vertical" "Horizontal" or "Move", and adjust image by pressing the 78 buttons.
Vertical Horizontal Move
1 1 1
78
Select
78
Adjust
Adjustment data is memorized in each wide image mode. Horizontal Adjustment of horizontal expand proportion on both sides of the image. Move Adjustment of vertical position of the image.
STATUS Return
M E N U Exit
NOTE : "Vertical", "Horizontal" and "Move" may not be adjusted depending on the screen size selected. "Vertical", "Horizontal" and "Move" can not be adjusted when the input signal is PC or DVI-D.
VIDEO COMPONENT ON-OFF
UP/DOWN PICTURE
PC/DVI-D
VOLUME OFF TIMER MUTE
To directly move up/down the image vertically, press the MOVE UP / MOVE DOWN buttons.
NOTE : Up and down picture function can work only when the input signal mode is "AV1", "AV2", "AV3", "Component1" or "Component2" and the image mode is "Natural wide", "Zoom" or "Zoom(Caption-IN)".
WIDE
PICTURE MOVE UP
MOVE UP button MOVE DOWN button
OK
STATUS MOVE DOWN MENU
SURROUND
AUTO PC
POWER
Move +3
28
COMPUTER MODE
SELECTING INPUT SOURCE
REMOTE CONTROL OPERATION
Select "PC" or "DVI-D" by pressing the PC/DVI-D button on the Remote Control Unit. PC DVI-D
FRONT CONTROL OPERATION
Select "PC" or "DVI-D" by pressing the INPUT button on the Front Control of the Plasma Monitor. (Refer to P21)
SELECTING COMPUTER SYSTEM
This Plasma Monitor automatically tunes to most different types of computers based on VGA, SVGA or XGA (refer to "COMPATIBLE COMPUTER SPECIFICATIONS" on page 32). When selecting PC for the input mode, this Plasma Monitor automatically detects the incoming signal and displays a proper image without any special setting. (Some computers need manual setting. ) If the Monitor may not be able to display a proper image, the following messages will be displayed.
Out of scan range
When the Plasma Monitor detects any signal out of the system formats provided in the Compatible Computer Specifications on page 32 of this manual, the message "Out of scan range" will be displayed for a few seconds. Make sure the connection of the computer and the Plasma Monitor.
No signal
29
COMPUTER MODE
PC ADJUSTMENT
PC MODE ADJUSTMENT
"PC mode adjustment" menu is provided to adjust "Clock", "Phase", "Position" and "Power save" to conform to your computer. These functions can be operated as follows:
1 2 3 4
Press the MENU button and the On-Screen Menu will appear. Press the ed buttons to select "PC mode adjustment" menu and then press the OK button. Press the ed buttons to select an item that you want to adjust, and then press the OK button. The selected item will appear.
PC MODE ADJUSTMENT MENU
Picture adjustment Sound adjustment Screen adjustment Picture setup Initial setup PC mode adjustment Screen saver Information
78
Adjust each value by pressing the 78 buttons.
Select
OK
OK
STATUS Return
M E N U Exit
Auto setup "Auto setup" function is provided to automatically adjust "Clock", "Phase" and "Position" to conform to your computer. [. . . ] When the Plasma Monitor is turned off with this function, the POWER indicator flashes and the Plasma Monitor cannot be turned on. Disconnect the Power cord and contact the sales dealer where you purchased the Plasma Monitor or the service center. To turn the Plasma Monitor back on for checking: 1) Disconnect the Power cord from the AC outlet and plug it again. If the Plasma Monitor cannot be turned on, disconnect the Power cord and contact the service center.
This symbol on the nameplate means the product is Listed by Underwriters Laboratories Inc. [. . . ]