[. . . ] GB Operator's manual sure Please read the operator's manual carefully and make ES Manual de instrucciones You understand the instructions before using the machine. The machine can be a dangerous tool if used incorrectly or carelessly, which can cause serious or fatal injury to the operator or others. Please read the operator's manual carefully and make sure you understand the instructions before using the machine. Inspection and/or maintenance should be carried out with the motor switched off and the plug disconnected. [. . . ] Check that the cord and extension cord are intact and in good condition. Do not use an extension cord while it is rolled up to avoid overheating. Never carry the machine by means of the cord and never pull out the plug by pulling the cord. Keep all cords and extension cords away from water, oil and sharp edges. The power tool should not be exposed to more moisture than what is provided by the water system. Ensure the cord is behind you when you start to use the machine so that the cord will not be damaged. Personal safety Use and care Carry out the checks, maintenance and service instructions described in this manual. Some maintenance and service measures must be carried out by trained and qualified specialists. Inspection and/or maintenance should be carried out with the motor switched off and the plug disconnected. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. Never use a machine that has been modified in any way from its original specification. Keep all parts in good working order and ensure that all fixtures are properly tightened. There is always a risk of crush injuries when working with products containing moving parts. Never use the machine if you are tired, if you have drunk alcohol, or if you are taking medication that could affect your vision, your judgement or your co-ordination. Ensure the switch is in the OFF-position before connecting to power source. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. Never allow anyone else to use the machine without first ensuring that they have understood the contents of the operator's manual. Be careful as clothing, long hair, and jewellery can get caught in moving parts. Make sure that no pipes or electrical cables are routed in the area to be drilled. Never work alone, always ensure there is another person close at hand. Apart from being able to receive help to assemble the machine, you can also get help if an accident should occur. [. . . ] The LED indicates that the ground fault circuit interrupter is on and that the machine can be switched on. See instructions under the heading Checking, maintaining and servicing the machine's safety equipment. This will also blow dust and dirt out of the motor, ensuring longer life for the machine. Always pull out the plug from the outlet socket before cleaning, maintenance or assembly. [. . . ]