[. . . ] OWNER'S MANUAL
Color Television
TM
27A10 32A10 36A10
© TOSHIBA CORPORATION, 2000
Reference Section
Advanced Operation
Basic Operation
Preparation
Set up
Set up
Preparation
Dear Customer Congratulations!This manual will help you use the many exciting and useful features to make your TV viewing more enjoyable than ever before. Before operating your TV set, please read all these safety and operating instructions completely and then retain for future reference.
Customer's Record You will find the model number and serial number on the back of your TV set. Refer to them whenever you call upon your TOSHIBA dealer regarding this product. [. . . ] If you select "FRANCAIS" for example, the display language changes to French.
LANGUE: DEMO: S. TITRA:
ENGLISH[FRANCAIS] ESPANOL MARCHE[ARRET] C1 C2 C3 C4 T1 T2 T3 T4[ARRET]
Advanced Operation
Press MENU until the Option menu is displayed on the screen.
Basic Operation
Press VOLUME T S to adjust the volume. To decrease the volume, press T .
Preparation
Set up
Programming Channel Memory
Set up
The channel memory is the list of TV channel numbers your TV will stop on when you press the CHANNEL v or w button. First, use the TV/CABLE and CH PROGRAM functions to preset all active channels in your area. If necessary, arrange the preset channels with the ADD/ERASE functions so that you can tune into only desired channels.
CHANNEL t s
TV/CABLE function
Preparation
1
MENU TV/VIDEO VOLUME CHANNEL POWER
Press MENU until the Setup menu is displayed on the screen. Press s or t until "TV/CABLE" is displayed in purple.
2
TIMER: 0 MIN TV/CABLE: [TV]CABLE CH PROGRAM ADD/ERASE: [ADD]ERASE V-CHIP CONTROL FAVORITE CH MOVE[t s] SELECT[T S]
3
Basic Operation
MENU
TS ts
RECALL
MUTE
POWER
Press T or S until the mode that corresponds to your TV signal system is displayed in purple. (VHF channels 2 through 13 and UHF channels 14 through 69) CABLE: Cable TV signals. (Cable channels 1 through 125)
TIMER: 0 MIN TV/CABLE: TV[CABLE] CH PROGRAM ADD/ERASE: [ADD]ERASE V-CHIP CONTROL FAVORITE CH MOVE[t s] SELECT[T S]
o
CH PROGRAM function
Advanced Operaion
1 4 7
100
2 5 8 0
CH
3 6 9
CH RTN
Channel Number
1 2
Press MENU until the Setup menu is displayed on the screen. Press s or t repeatedly until "CH PROGRAM" is displayed in purple.
TIMER: 0 MIN TV/CABLE: TV[CABLE] CH PROGRAM ADD/ERASE: [ADD]ERASE V-CHIP CONTROL FAVORITE CH MOVE[t s] START[T S]
ENT
TS
VOL
Reference Section
MENU/ ENTER
VOL
MENU
TV CABLE VCR
CH
st CHANNEL st
3
EXIT
FAV CH TV/VIDEO A
PLAY PIP FF
Press T or S to start channel programming. The TV will automatically cycle through all the TV or CABLE channels depending on the mode selected, and store active channels in the channel memory.
CH PROGRAM CABLE
24
REC
TV/VCR
STOP
STILL SOURCE SLOW PAUSE REW PIP CH
4
LOCATE SWAP
When channel programming is complete, you will see the message at the right.
CH PROGRAMMING COMPLETED CABLE 4
5
Press CHANNEL s or t to make sure the channel programming has been done properly.
16
ADD/ERASE function
After performing the CH PROGRAM function, you can add or erase specific channels.
CABLE channel reference chart
Number on this TV Corresponding CABLE channel Number on this TV Corresponding CABLE channel
1 2 3
5 6
5(A-7) 6(A-6) A B C
68 69
68 69
. . . . . . . . . . . . . . . . . . . . .
Press s or t repeatedly until "ADD/ ERASE" is displayed in purple.
TIMER: 0 MIN TV/CABLE: [TV]CABLE CH PROGRAM ADD/ERASE: [ADD]ERASE V-CHIP CONTROL FAVORITE CH MOVE[t s] SELECT[T S]
14 15 16
92 93 94 95 96 97 98 99 100 101 102
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
Press MENU repeatedly until the Setup menu is displayed on the screen.
92 93 94 A-5 A-4 A-3 A-2 A-1 100 101 102
. . . . . . . . . . . . . . . . . . . . .
Press T or S : To erase the channel Press the button until "ERASE" is displayed in purple indicating that the channel has been erased from the memory.
TIMER: 0 MIN TV/CABLE: [TV]CABLE CH PROGRAM ADD/ERASE: ADD[ERASE] V-CHIP CONTROL FAVORITE CH MOVE[t s] SELECT[T S]
. . . . . . . . . . . . . . . . . . . . .
34 35
. . . . . . . . . . . . . . . . . . . . .
4
U V W AA BB
. . . . . . . . . . . . . . . . . . . . .
To add the channel Press the button until "ADD" is displayed in purple indicating that the channel has been memorized.
TIMER: 0 MIN TV/CABLE: [TV]CABLE CH PROGRAM ADD/ERASE: [ADD]ERASE V-CHIP CONTROL FAVORITE CH MOVE[t s] SELECT[T S]
36 37 38
. . . . . . . . . . . . . . . . . . . . .
5
Repeat steps 1 to 4 for other channels.
61 62 63 64 65 66
YY ZZ AAA BBB 65 66
123 124 125
123 124 125
The above chart is typical of many cable system channel allocations. If in doubt, consult your cable company.
17
Reference Section
You have now completed the channel programming.
60
XX
Advanced Operation
Basic Operation
Preparation
Select the channel you want to erase using the CHANNEL v or w button, or select the channel you want to add using the Channel Number buttons.
1
A-8
67
67
Set up
Watching TV Programs or Video input
Set up
Selecting the TV channels
TV/VIDEO CHANNEL t s
Select a channel in one of the following two ways.
q
To scan the memorized channels in numerical sequence
Press CHANNEL s to select the next higher channel. Press the button again to select the next memorized channels.
MENU
TV/VIDEO
VOLUME
CHANNEL POWER
Preparation
q
MENU
TS ts
To select a channel directly Press the Channel Number buttons (0-9 and 100). To select channel 4, press "4" (or press "0", "4"). To select channel 125, press "100", "2", "5" in sequence. If you cannot select certain channels, either TV (off the air) or CABLE channels Check if the TV/CABLE function is properly set. See page 16.
Basic Operation
RECALL
MUTE
POWER
RECALL
o
Selecting the video input source
1 4 7
100
2 5 8 0
CH
3 6 9
CH RTN
Channel Number
You can use the TV/VIDEO button to view signal coming from other devices, such as VCR's or video disc players that may be connected to your TV. (See "Connecting Your TV" on page 5. )
Note: To operate your TV and video equipment properly, refer to the instructions
furnished with the video equipment.
ENT
Advanced Operaion
1 2
VOL
Turn the TV and the video equipment ON. Press TV/VIDEO on the Remote Control or on the TV to select "VIDEO 1" or "VIDEO 2". The selected source will be displayed in purple.
MENU/ ENTER
VOL
CHANNEL st
CH TV CABLE VCR
T V VDO IE1 VDO IE2
TO SELECT PUSH TV/VIDEO
EXIT
FAV CH TV/VIDEO A
PLAY PIP FF
EXIT TV/VIDEO
Reference Section
REC
TV/VCR
STOP
STILL SOURCE SLOW PAUSE REW PIP CH
3
Operate the video equipment normally.
LOCATE SWAP
About the Demonstration Mode
When this function is activated, your TV will automatically display a variety of its on-screen menus and special features. This function is provided for demonstration purposes only.
1 2
Press MENU, then s or t until "DEMO" in the Option menu is displayed in purple. The on-screen demonstration will start after about 15 seconds.
LANGUAGE:[ENGLISH]FRANCAIS ESPANOL DEMO: [START]STOP C. CAPT: C1 C2 C3 C4 T1 T2 T3 T4[OFF]
MOVE[t s] SELECT[T S]
To stop the demonstration Press EXIT or RECALL on the Remote or select "STOP" in the menu.
18
Convenient Remote Functions
Displaying on-screen information
RECALL
RECALL MUTE
POWER
Press RECALL to display the following onscreen information.
q
o
MUTE
1 4 7
100
q
CBE AL
4
5 8 0
CH
6 9
CH RTN
Channel Number
Muting the sound
CH RTN
ENT
CH TV CABLE VCR
MT UE
EXIT
FAV CH TV/VIDEO A
PLAY PIP FF
REC
TV/VCR
STOP
STILL SOURCE SLOW PAUSE REW PIP CH
Note: When the MUTE button is pressed, the Closed-Captioned feature "C1" is activated. ("MUTE" on the screen display will disappear. ) To deactivate, press the MUTE button again or press Volume to restore the sound. (This feature only functions when the Closed Caption mode is set to "OFF". )
LOCATE SWAP
Changing quickly between two channels
Press CH RTN to return to the last channel viewed. [. . . ] Commercial Units Products sold and used for commercial use have a limited ninety (90) day warranty for all parts, labor and picture tube. Owner's Manual and Demographic Card You should read this owner's manual thoroughly before operating this product. You should complete and mail the enclosed Demographic card within ten days after you, or the person who has given you this product as a gift, purchased this product. This is one way to enable TACP/THI to provide you with better customer service and improved products. [. . . ]