[. . . ] VT-PTZ10
Ultra-Compact PTZ Camera with 10x Optical Zoom
VITEK
· Built-In 3. 8-38mm Lens with 10x Optical / 10x Digital Zoom. · 4 Patterns record and play back user preference of surveillance path up to 120º sec. · 8 Scans: 8 speed steps from slow to medium panning with smooth Diagonal Scan. · 4 Tours: Each tour consists up to 32 Presets, Patterns, and/or Scans. [. . . ] Scroll down to the Save and Exit option and move the Joystick to the right to save and exit. Rotate the handle clockwise or counterclockwise to scroll through the alphanumeric characters, move the handle to right or left to select next or previous space.
24
VT-PTZ10
7. Pressing ESC will not save recorded data and will exit to the previous menu. Press the HOME or OFF button at any programmed position to delete the programmed pattern.
NOTE: If total recording time reaches 120 seconds, it will automatically stop for a moment and start recording again. 3. 1. 4 SCAN ( MENU => FUNCTIONS => SCAN or Shortcut: SCAN)
The Scan function supports up to 4 programmed sections of angles at 8 programmable speeds. SCAN MENU 01/8
SCAN 01 : AUTOSCAN01 SPEED : 1~8/SLW/MID START : NONE END : NONE DIRECTION : CCW SWAP : OFF SAVE AND EXIT SPEED (MODE): 1/ 2 / 3/ 4/ 5/ 6/ 7/ 8/ SLOW / MEDIUM 1: SLOWER 8 FASTER SLW : smooth DiagonalScan in slowest speed MID : smooth DiagonalScan in medium speed DiagonalScan shows moving path from start point to end point including tilt and zoom** simultaneously. **Some models do not change zoom ratio
25
VT-PTZ10
Follow the steps below to program Scans. Twist the Joystick to enter the title by scrolling through the alphanumeric characters and move the handle to the right or left to move to the next space. When finish entering the title, select "START ANGLE" with the Joystick. Hold down the SHFT/PGM key while selecting the start position using the Joystick. (Or twist zoom handle or hit zoom button to start PTZ control for view selection and hit the Focus button to stop. ) 5. Move the Joystick downward to select "END ANGLE. " Hold down the SHFT/PGM key while moving the Joystick to select the end position. Release the SHFT/PGM key to complete the selection of the end position. (Or twist zoom handle or hit zoom button to start PTZ control and hit the Focus button to stop. ) 6. Move the Joystick downward to select "Tilt & Zoom. " Set the zoom and tilt angle by holding down the SHFT/PGM key. Moving the Joystick downward to select "Speed" and set the speed by twisting the Joystick clockwise or counterclockwise or move the Joystick left/ right to select the auto scan speed. Pressing the HOME or OFF button to delete stored data, 000 will be displayed immediately.
26
VT-PTZ10
3. 1. 5 TOUR (or MENU => FUNCTIONS => TOUR, Short Cut: TOUR)
There are 4 programmable Tours. Each Tour consists of up to 8 Preset positions, Patterns, Scans or other Tours. Using second-level Tours, it can be expanded up to 56 functions in a single Tour. However tours in the second level Tour will be ignored when called by the first level Tour. This can be best illustrated by the following example: If Tour Tour Tour Tour 01 02 03 04 : : : : Preset 02, Preset 03, Tour 02, Tour 03 Preset 05, Preset 06, Tour 04, Preset 05 Preset 07, Pattern 01 Preset 08. Preset 05, Pattern 01
Tour1 executes as follows: Preset 02 Preset 03 Preset 05 Preset 06 Preset 05 Preset 07 Pattern 01 . . . [. . . ] When the dome flips (rotates), the camera starts moving upward as long as the tilt control is kept in the down position. Once the control is released, the tilt control returns to its normal operational mode. The flip feature is useful when you need to track someone who walks directly beneath the dome and continues on the other side. HOME POSITION The default position to which the dome camera returns after an assigned period of inactivity passes. [. . . ]