[. . . ] Owner's Manual
www. pyleaudio. com
PPG850A Guitar Amplifier
1
1) High Input Jack: Connect high 2) Low Input Jack: Connect low 3) Gain: This sets the volume gain
level for Channel 1. [. . . ] high frequency level.
10) Power LED: Illuminates when
11) Master: Adjusts overall volume.
1) Power Switch: Switches amplifier 2) Power Cord: Connect the included
power cord here. on/off.
6) Send: This jack lets you insert an 7) Reverb Remote: Connect a
effects processor into the signal path.
3) Phones: This is your headphone
4) Line Out: Lets you output a line 5) Return: Use this jack to bring
back processed signal (see 6). Inserting the headphones disables the internal speaker (great for practicing). Internal speaker is not disabled.
footswitch (not included) to remotely switch on/off the internal reverb effect.
2
Troubleshooting
Distorted Sound: Check if the amplifier is overdriven. [. . . ] Try a different cable.
Specifications
Model Driver RMS Peak Dimensions Weight
PPG850
12" High Definition Speaker
50W
300W
W = 17" D = 11. 5" H = 19. 25"
37 lb.
3
www. pyleaudio. com [. . . ]