[. . . ] After the self-test, the M1 light will flash once every second, indicating normal operation. This Package Contains English One SMC Barricade English One Power Adapter This Quick Installation Guide One Installation CD One Category 5 Fast Ethernet Cable Configuring Your Computer with Windows 95/98/ME 1. Click "Obtain an IP address automatically. " English 5. If there are any "Installed Gateways" listed, highlight each one and click "Remove. " 2. From "Control Panel" Double-click the "Network" icon. English 3. [. . . ] Select "Direct connection to the internet. " Click "OK. " English iii. Clear all the checkboxes and click "OK. " Click "OK" again to close the "Internet Options" window. 13. Repeat these steps for each computer connected to your Barricade. English Configuring Your Barricade If you connect to the Internet using a: Cable Modem, turn to page 13 DSL Modem, turn to page 15 DSL Modem with a Log In name and Password, turn to page 17 b. Click "Edit", then click "Preferences. . . " Configuring Your Barricade for a Cable Modem 1. In the "Location" field (for Netscape) or "Address" field (for Internet Explorer), type "http://192. 168. 123. 254" and press <ENTER>. In the "System Status" page of the Barricade web console, type your password in the "System Password" field (default is "admin") and click the "Log In" button. 5. Under "WAN Type" Click the "Change. . . " button. 6. Select "Dynamic IP Address" and click the "Save" button. English English 7. Key in your "Host Name" if your Internet Service Provider has given you one (i. e. When prompted to reboot now, click "OK. " 10. Once the Barricade is rebooted, you can surf the Internet as you normally would from all computers connected to it. 4. Click "Primary Setup" Configuring Your Barricade for a DSL Modem 1. Select "Static IP Address" and click the "Save" button. 2. In the "Location" field (for Netscape) or "Address" field (for Internet Explorer), type "http://192. 168. 123. 254" and press <ENTER>. In the spaces provided, key in the values provided to you by your ISP. (Note: Enter the IP Address given to you in the "WAN IP Address" field, not the "LAN IP Address" field. ) 3. In the "System Status" page of the Barricade web console, type your password in the "System Password" field (default is "admin") and click the "Log In" button. English English 4. Click "Save", and then click the "Reboot" button. 9. Under "WAN Type" Click the "Change. . . " button. 10. Once the Barricade is rebooted, you can surf the Internet as you normally would from all computers connected to it. Configuring Your Barricade for a DSL Modem with a Log-In Name and Password 1. In the "Location" field (for Netscape) or "Address" field (for Internet Explorer), type "http://192. 168. 123. 254" and press <ENTER>. In the "System Status" page of the Barricade web console, type your password in the "System Password" field (default is "admin") and click the "Log In" button. 6. Select "PPP over Ethernet" and click the "Save" button. English 7. If your ISP has supplied you with a Service Name, enter it in the "Service Name" field; otherwise, leave it blank. English 4. [. . . ] If you subscribe to an "@Home" service and have a dynamic IP address, you will need to enter a "host name. " If your ISP does not require a host name, you must leave this field blank. In the "Location" field (for Netscape) or "Address" field (for Internet Explorer), type "http://192. 168. 123. 254" and press <ENTER>. In the "System Status" page of the Barricade web console, type your password in the "System Password" field (default is "admin") and click the "Log In" button. 6. If your ISP does not require a domain name, you must leave this field blank. [. . . ]