[. . . ] Power Over Ethernet Supply
Connecting to your Power-Over-Ethernet Supply Adapter (WLE-POE-S)
The WLE-POE-S Power Supply Adapter is an adapter for supplying power the AirStation. Using this product enables compatible AirStations or AirStations with a compatible POE Receiver Adapter to be used in locations that are not provided with a nearby power source. [. . . ] Connect the AC adapter to the AC outlet.
AC outlet
LAN cable AC adapter
WLE-POE-S
(power supply adapter)
POE- compatible AirStation
WAN port Use CAT 5 cable
LAN port Hub, etc.
Supplying Power to non-POE-compatible AirStations
Connect the hub or PC to the LAN port of the WLE-POE-S Power Supply
Adapter.
Connect CAT5 cable between the POE ports of the WLE-POE-S Power Supply
Adapter and the WLE-POE-R33/R7 Receiver Adapter. Adapter.
Connect the AirStation to the LAN port of the WLE-POE-R33/R7 Receiver Connect the AC adapter of the WLE-POE-S Power Supply Adapter to the
power outlet.
LAN cable AC adapter DC cable
AC outlet
WLE-POE-S
(power supply adapter)
POE port
LAN port
Hub, etc.
WLE-POE-R Adapter
POE port
LAN port DC Connector
Use CAT 5 Cable
AirStation
2
Connections
NOTE: Using a cable other then CAT5 may prevent the supply of power to the AirStation. Thus, the total length of cable allowed between the Power Supply Adapter and the POE Receiver is 100 meters.
Compatible AirStations
POE-compatible AirStations
* WLM-L11G
Non-POE-compatible AirStations (These models require the WLE-POE-R33/R7 Receiver
Adapters, sold separately. )
* WBR-G54 * WBR2-G54 * WHR3-G54 * WLA-G54 * WLA-G54C * WLA2-G54 * WLI-TX1-G54 * WLI2-TX1-G54
* WLA-L11G * WLA-AWCG * WLA-AWCG * WLAR-L11G-L * WLAR-L11-S * WLAR-L11-M
Compatible POE Receiver Adapters
* WLE-POE-R33 (For 3. 3v AirStation Products) * WLE-POE-R7 (For 7v AirStation Products)
NOTE: The WLE-POE-S Power Supply Adapter uses the IEEE802. 3af standard and injects 48V over the CAT5 cable. The WLE-POE-S Power Supply Adapter can be used with IEEE802. 3af POE Receiver Adapters. However, it is recommended to always use the WLE-POE-R33 or WLE-POE-R7 POE Receiver Adapters in conjunction with Buffalo AirStation products.
3
Specifications
Specifications
100 Mbps (100BASE-TX) 10 Mbps (10BASE-T) RJ-45 modular connector 100BASE-TX / 10BASE-T dual purpose port (for connecting the POE Receiver Adapter) 100BASE-TX / 10BASE-T dual purpose port (for connecting a hub or PC) 100 to 240 VAC, 50/60 HzV 48 VDC 0. 3A 250mW Temperature: 0 to 40 degrees C Humidity: 20 to 80% (non-condensing) 109 (W) x 23 (D) x 45 (H) 240g
Transmission Rate
Connector POE Port LAN Port Input Power Supply (AC) Output Power (POE) Maximum Output Current Maximum Current Consumption Operating Environment Dimensions (mm) Weight
4
FCC Statement
FCC Statement
This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case, the user will be required to correct the interference at his own expense.
All rights for this setup guide are owned by Buffalo INC. No part of it may be
transmitted, reproduced, or revised without expressed permission from BUFFALO INC.
The names of other products used in this manual are trademarks or registered
trademarks. Trademark symbols are not indicated in this setup guide.
Specifications, designs and other descriptions in this manual are subject to
change without notice.
This setup guide has been carefully prepared, however, feel free to contact
technical support if you have any questions or problems. [. . . ] * If using the product for applications with devices and computer systems requiring higher reliability than general-purpose OA devices, be sure to configure the system with an appropriate safety design and measures against failure.
5
6
Notes
This page intentionally left blank.
7
4030 W. Suite 120 Austin, Texas 78759 Tel: 800-456-9799 Fax: 512-794-8606
Technical Support is available 24 hours a day, 7 days a week (USA / Canada) Toll-Free: 866-752-6210 email: info@buffalotech. com ©2004, Buffalo Technology (USA), Inc. [. . . ]