[. . . ] Accessories Set VR002
Installation Manual
For further information, please consult www. arctic. ac
Compatibility
nVIDIA GeForce GTX 285, 280, 275, 260+, 260
Accessories
Heatsinks x 8 Heatsinks x 7 Heatsinks x 2 Heatsinks x 4 Heatsinks x 2 Heatsinks x 1 Mounting plate x 1
Screws (M3) x 2
Screws (M2. 5) x 4
Screws (M2) x 7
Spacers x 4
Washers x 4
Adhesive Tape x 1
Thermal pad for NVIO heatsink (10x 10 x 1mm) x 1
*Thermal adhesive (3g) x 1
*Be aware that the thermal adhesive comes with a very short shelf life and shall be used within 1 week. [. . . ] Fasten each screw alternately (screw A-> D -> B -> C) with 2 to 3 clockwise rotations. Repeat until all 4 screws are tightened.
Tips for applying thermal adhesive
RAM Voltage regulator
How to squeeze out all the glue?
Apply pressure (10 sec)
Cure time
60mins
Caution: Please make sure the heatsinks are not touching any circuit components as it may cause a short circuit to your VGA card.
Installation of RAM and voltage regulator heatsinks
1
Installation of mounting plate
1. Uninstall default mounting plate
Heatsinks align to the Botto
m
Heatsinks align to the right
Heatsinks align to the left
2
2. Install replacement mounting plate comes with the accessories set
Installation of main cooler
Please follow the installation instructions provided with the main cooler.
ARCTIC Switzerland
Huobstrasse 4 8808, Pfäffikon, Switzerland www. arctic. ac
Copyright 2010 ARCTIC Switzerland. [. . . ] In no event shall ARCTIC its directors or employees be liable for any indirect damages, incidental or consequential damages arising from any defect or error in this manual or product. [. . . ]