[. . . ] USER'S GUIDE
59G9 SERIES
3
Safety Instructions Product View Assembly Operations Maintenance and Care Troubleshooting Consumer Services Replacement Parts Additional Accessories Warranty
4
5-6
6-9
10-15
16-17
18
19
19
20
Thanks for buying a BISSELL PureProTM
We're glad you purchased a PurePro vacuum. Everything we know about floor care went into the design and construction of this complete, hightech home cleaning system. Your PurePro vacuum is well made, and we back it with a limited three year warranty. We also stand behind it with a knowledgeable, dedicated Consumer Services department, so, should you ever have a problem, you'll receive fast, considerate assistance. [. . . ] Note: This should not replace normal cleaning and maintenance procedures. Microban is a registered trademark of Microban Products Company.
CAUTION:
To avoid personal injury and to prevent the cleaner from falling when cleaning stairs, always place it at the bottom of the stairs.
3
Using the Tools
1. Removethehosefromthewandbase. This
automaticallydivertsthesuctiontothehose. Usethehosealoneorattachanyofthetools
Always place the vacuum cleaner on the floor in its fully upright position when using tools. Placing the vacuum in this position automatically stops the rotating brush.
TurboBrush
Use rotating brush action for small areas such as stairs and upholstery.
Note: press gently when using the Turbobrush to gain maximum cleaning. Too much pressure could cause the brush to stop rotating.
Dusting Brush
Use on furniture or upholstery.
Crevice Tool
Use in tight narrow spaces
Extension Wand
Use with desired attachment for a longer reach
8
www. bissell. com
800. 237. 7691
Operation
Empty dirty container
Empty the dirt container as soon as the dirt reaches the "full" line on the side of the container. Graspthehandleandpullthedirtcontainer
straightouttoremovefromthevacuum.
4. Emptydirtintogarbagecontainer.
NOTE: Emptying the dirt container after every use will help prevent over filling and ensure that the vacuum is ready to go the next time you clean.
Cleaning the dirt container
Additional steps can be taken to clean the dirt container as necessary. Whilethedirtcontainerisstilloutoftheunit,
grasptheinnercyclonescreenandtwistto therightuntilthelockingtabsstopthe rotation. Pulldowntheinnercyclonescreen toremoveit. Wipeouttheinsideoftheuppertankand
theinnercyclonewithadampclothmoistenedwithwateroramildcleaningsolution. washedinwarmwater. Makesureitis completelydrybeforereassembling. Donot putinthedishwasher. screenbyslidingitintotheuppertankand rotatingittotheleftuntilthelockingtabs stoptherotation. Theinnercyclonescreen islabeledfrontandback. Whenproperly assembledthefrontgraphicshouldfaceout.
2
5. Ifdesired, thelowerdirtcontainermaybe
To reduce the risk of electric shock, turn power switch OFF and disconnect polarized plug from electrical outlet before performing maintenance or troubleshooting checks.
4
6. ChecktheHEPAmediafiltercartridgeand
essary(seecleaningyourpre-motorfilteron page11). replaceifnecessary(seecleaningyour post-motorHEPAmediafilteronpage11). noticeaclogintheuppertank, removethe innercyclone(seecleaningthedirtcontainer onpage10. ) hosewandbase. Checkforacloginthebase, thewand, orinthehose.
CAUTION:
To reduce the risk of injury from moving parts, turn off vacuum cleaner and disconnect power plug from electrical outlet.
5. RemovetheTwist`nSnaphosefromthe
vacuumbyturningtotheleft. Straightenthe hoseandunclogwithalong, narrowobject suchasabroomhandle. checkingtherotatingfloorbrushanddrive beltonpage13andinspecttheairpassagewayforobstructions
8. Iftheclogpersists, followtheinstructionsfor
If suction is normal in the hose, check for and clear the clog for floor cleaning: 1. Ifyouarenotabletotellfromtheoutsideifa
clogispresent, removethescrewatthetop leftofthefoothose. Laythefoothoseflatand unclogwithalong, narrowobjectsuchasa broomhandle.
Remove any clogs found and fully reassemble the cleaner before attempting to check suction again or using the cleaner.
www. bissell. com 800. 237. 7691
11
Maintenance and care
Thermal motor protection
An internal thermal protector has been designed into your cleaner to protect it from overheating. When the thermal protector activates, the main vacuum motor will stop operating. Checkthecleanerforthesourceof overheatingproblem(i. e. fulldirtcup, dirty filtersorclog). [. . . ] Unplugcleanertoresetbrushseepg. 14
16
www. bissell. com
800. 237. 7691
Troubleshooting
Vacuum cleaner is difficult to push
Possible causes
1. Adjustpowerfoottocorrectheightsetting seepg. 7
Visible dirt escaping from cleaner
Possible causes
1. Pulloutandre-insertdirtcontainercorrectly
Other maintenance or service not included in the manual should be performed by an authorized service representative.
Thank you for selecting a bISSEll product.
Please do not return this product to the store.
For any questions or concerns, bISSEll is happy to be of service. Contact us directly at 1-800-237-7691.
www. bissell. com
800. 237. 7691
17
BISSELL Consumer Services
For information about repairs or replacement parts, or questions about your warranty, call:
bISSEll Consumer Services 1-800-237-7691
Monday - Friday Saturday
Or write: BISSELL Homecare, Inc. [. . . ]