[. . . ] Press the steam trigger on the handle until no more steam exits, to release any residual steam and pressure within the boiler. Please note that the safety cap cannot be opened if there is even minimal steam pressure in the boiler. [. . . ] Remove the mesh cover and rinse under running water, to dislodge any debris. IMPORTANT: Please be careful in replacing this cover, as without it VAP&DRY will not work correctly. Remove the filter, rinse under warm water and dry completely before replacing (Fig. These are available from your local Hoover dealer or direct from Hoover. HOOVER SERVICE Should you require service at any time please call your local Hoover service office. 2G) Use this tool over large surfaces using the following inserts: · How to fit inserts: (Fig. 17) Slide the two locks on the top of the nozzle to the open position. Remove the current attachment and insert the alternative with the large section to the front of the nozzle. Lock the attachments in position by sliding the locking features on the top of the nozzle to the locked position. 2C) Ideal to clean difficult to reach areas, it may be used also to: · Clean taps, sinks and other sanitary fixtures etc. [. . . ] Quality: Our factories meet the strict standards that ensures that European safety standards are met and maintained throughout the production life of an appliance. Safety: We gain independent approval to demonstrate that our domestic electrical appliances are safe. [. . . ]