[. . . ] Attention:Please read the operating manual prior to operating the machine for the first time.
GB
1 2 3 4 On/Off button Rinse aid level indicator light Half Load (1/2) Programme selection button Programme indicator lights Salt level indicator light LED progress indicator lights Start/Pause button
5 6 7 8
How to use your dishwasher:
· Open the water tap. · Push in the on/off button and check that the programme light comes on. [. . . ] are cleaned in the fastest way.
Detergents A=25 cm³/15 cm³ B=5 cm³ Pre-wash End
Few A
Wash Cold rinse Hot Rinse End
Medium A+B
Pre-wash Wash Cold rinse Hot Rinse Dry End
Medium A+B
Wash Cold rinse Hot Rinse Drying End
High A+B
Pre-wash Wash Cold rinse Hot Rinse Dry End
Programme sequence (without options)
Duration (min) Water (I) Energy (kWh) Half Load
14 4, 2 -
30 11, 8 0, 79 -
136 15 1, 05 +
58 11, 8 1, 32 +
115 17, 5 1, 67 +
The consumption values shown in the table were determined under standard conditions. * Reference programme for testing institutes The tests in accordance with EN 50242 must be carried out with a full water softener salt dispenser and a full rinse aid reservoir, and using the test programme.
QUICK REFERENCE GUIDE
1 2 3 4
GB
On/Off button Rinse aid level indicator light Half Load (1/2) Programme selection button Programme indicator lights Salt level indicator light LED progress indicator lights Start/Pause button
5 6 7 8
On/off button You turn your dishwasher on / off with this button. When turning on, the indicator light for the last used programme will light up.
Visual Indicator
!Important: Depending on the stage of the programme you have cancelled, there may be detergent residue or rinse aid inside the machine and on the load. Make sure the items in the dishwasher are not used before washing properly. How to change the washing program To change the program selection while the machine is operating open the door. The indicator light will be on and close the door new program will start. It will start from the stage last carried out by the previous program selection. Warning Depending on the length of the terminated program detergent and rinse aid may still be in the dispensers. Improper Loading Of Dishware
Salt level indicator light When this indicator light comes on, you must refill special salt (If applicable). In machines which do not possess an electrical salt indicator, the salt content can be read on the container for the salt. When the visual fill indicator is dark, there is enough salt in the container.
When the colour is light, open the container and add dishwasher salt.
Visual Indicator
Program selection buttons Use the program selection button to select the desired program. The corresponding program light lights up Half Load (1/2) button When there are few dishes, you press this button after pressing the programme selection button. When turning the dishwasher on, the indicator light on the button lights up. [. . . ] When the visual fill indicator is dark, there is enough rinse aid in the dispenser. When the colour is light, open the dispenser and refill rinse aid.
LED progress indicator lights The program sequence throughout the washing process can be monitored from the progress indicator lights on the control panel.
17 1487 01 00-10 [. . . ]