[. . . ] SYMBOLS Please read the instructions carefully before starting the machine. 10, 5 m/s2 Typical A-weighted sound levels: Sound pressure level (K = 3 dB(A)) . [. . . ] Appliances used at many different locations including open air must be connected via a residual current operated device (FI, RCD, PRCD). It is recommended to wear gloves, sturdy non slipping shoes and apron. Sawdust and splinters must not be removed while the machine is running. Always disconnect the plug from the socket before carrying out any work on the machine. When working in walls ceiling, or floor, take care to avoid electric cables and gas or waterpipes. SPECIFIED CONDITIONS OF USE The rotary pneumatic hammer can be used for hammer drilling, chiselling in stone and drilling in wood, metal as well as plastic. EC-DECLARATION OF CONFORMITY We declare under our sole responsibility that this product is in conformity with the following standards or standardized documents. Do not dispose of electric tools together with household waste material!In observance of European Directive 2002/96/ EC on waste electrical and electronic equipment and its implementation in accordance with national law, electric tools that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility. It is also possible to connect to sockets without an earthing contact as the design conforms to safety class II. [. . . ] As well as the machine type printed on the label and order the drawing at your local service agents or directly at: AEG Elektrowerkzeuge, Max-Eyth-Straße 10, D-71364 Winnenden, Germany. Får endast anslutas till 1-fas växelström och till den spänning som anges på dataskylten. [. . . ]