[. . . ] In case the base plate can't be tensioned anymore after frequent adjusting, the base plate setting mechanism can be re-adjusted. [. . . ] Dust that arises when working on wood or using the tool on industrial material can be dangerous to health. Plunge cuts without pre­drilling a hole are possible with soft materials (wood, light building materials for walls). Harder materials (metals) must first be drilled with a hole corresponding to the size of the saw blade. The dust that arises when working with this tool can be detrimental to health and therefore not reach the body. SPECIFIED CONDITIONS OF USE This jig saw can cut wood, plastic and metal; it can cut straight lines, bevels, curves, and internal cut­outs. EC-DECLARATION OF CONFORMITY We declare under our sole responsibility that this product is in conformity with the following standards or standardized documents. It is also possible to connect to sockets without an earthing contact as the design conforms to safety class II. Under the effect of extreme electromagnetic interferences from the outside, temporary variations in the speed of rotation could arise in particular cases. [. . . ] Bestämmelser och riktlinjerna 98/37/ EG, 89/336/EWG NÄTANSLUTNING Får endast anslutas till 1-fas växelström och till den spänning som anges på dataskylten. [. . . ]