[. . . ] If necessary, pull the blue lock lever (circled) toward the front of the printer to lock the transfer belt into place. 5. Grasp both handles and lift the transfer belt unit out of the printer. [. . . ] Grasp both handles and lift the transfer belt unit out of the printer. Make sure the blue lock levers at either end of the fuser have snapped back locking the fuser unit in place. Be careful to avoid touching the shiny black surface of the transfer belt. 10. Close the cover and turn on the printer. 4. Press back on the lock lever (circled) and, while holding the lock lever, lift the end of 7. Hold the transfer belt by the handles and lower it into the printer, carefully aligning the pins at the front of the belt into the slots at the front of the printer. Limited Warranty: United States Oki Data Americas, Inc. and Canada, English only) or at 1-856-222-5276 (Spanish only), or by contacting one of the service locations listed below. For the most comprehensive, up-todate information on service center locations, call 1-800-BARTSCHER-DATA (1800-654-3282). This Limited Warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Oki Data Service Centers United States Oki Data Americas, Inc. Laurel, NJ 08054 Phone: 1-800-654-3282 Fax: 1-856-222-5247 Canada Oki Data Americas, Inc. East, Unit 1 Mississauga, Ontario L4W 4M8 Canada Phone: 1-800-654-3282 Fax: 1-905-238-4421 Mexico Oki Data de Mexico, S. A. [. . . ] Laurel, NJ 08054 Phone: 1-800-654-3282 Fax: 1-856-222-5247 Canada Oki Data Americas, Inc. East, Unit 1 Mississauga, Ontario L4W 4M8 Canada Phone: 1-800-654-3282 Fax: 1-905-238-4421 Mexico Oki Data de Mexico, S. A. [. . . ]