[. . . ] Contents
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] On Screen Help For all menus, press the INFO button to display the help information about the menu functions.
Conditional Access
· Press the "MENU" button to display the main menu and use the " " or " " button to highlight the "Conditional Access" line and press the "OK" button:
Some Digital Terrestrial channels operate on a Pay Per View basis. Obtain the Conditional Access Module (CAM) and the viewing card by subscribing to a pay channel company, then insert those to the TV using the following procedure. · The CAM should be correctly inserted, it is impossible to insert fully if reversed. The CAM or the TV terminal may be damaged if the CAM is forcefully inserted. · Connect the TV to the mains supply, switch on and then wait for few moments until the card is activated. Please set the CAM by entering the IDTV menu, Conditional Access then pressing the "OK" button. (CAM set up menu is not displayed when it is not required. ) · To see the viewing contract information: enter IDTV; press the "MENU" button, then highlight Conditional Access and press the "OK" button. · When no module is inserted, "No Conditional Access module detected" message appears on the screen. · Refer to the module instruction manual for details of the settings.
Note: Insert or remove the CI module only when the TV is switched off or in standby mode.
Program Guide
This section is same with the instructions given in the General Operations page. Please see Electronic Programme Guide (EPG) section in the General Operations part.
Timers
To display timers window, activate the item from the main menu. Channel: " " or " " keys will navigate the user through the TV or Radio list. Date: Starting date is entered via the Left/Right or the numeric buttons. Start: Starting time is entered via the Left/Right or the numeric buttons. End: Ending time is entered via the Left/Right or the numeric buttons. Change/Delete: permits or prohibits any modifications for other users. You can save the adjustments by pressing the GREEN key or cancel the process by pressing the RED button.
TV Setup
You can use this item to display the TV functions. Press the "MENU" button to display the main menu and use " " or " " button to highlight "TV Setup", press the "OK" button to display TV Setup menu screen.
You can find detailed information for all menu items in "Analogue TV Menu System" section.
Setup
The adjustments in this menu are given as the following:
English - 14 -
Configuration
You can configure the settings of your TV. Select Configuration from Setup menu and press "OK" to view this menu. Press the "RETURN" button on the remote control to exit.
Receiver Upgrade Over Air Download (OAD)
This feature helps to keep your TV updated. It works automatically and searches for new information when available. each day and searches for any new information which may be broadcasted and will download this to your receiver automatically. This operation will normally take approximately 30 minutes.
Note: Your TV may start in First Time Installation mode after OAD update.
Parental Control Dolby D Digital (*for EU countries except UK)
In the Configuration Menu, highlight the Dolby D item by pressing " " or " " buttons. [. . . ] You can set the desired option by highlighting it using " " or " " button and then by pressing OK button.
English - 24 -
Tips
Image Persistence
Please note that ghosting may occur while displaying a persistent image. To avoid this, do not leave the screen in still picture for extended periods.
No Power
If your TV system has no power, please check the main power cable and connection to the mains socket outlet.
Poor Picture
Have you selected the correct TV system?Is your TV set or house aerial located too close to a non-earthed audio equipment or neon lights, etc. ?Mountains or high buildings can cause double pictures or ghost images. [. . . ]