[. . . ] 46" LCD Colour Television
L46VN05U
Contents
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Use the " " or " " buttons to set the Dolby D Digital as On or Off. If the channel that you are watching supports Dolby Digital, you can turn this setting on.
Hard of Hearing (*for EU countries except UK) Use " " or " " button to select Hard of Hearing and then press " " or " " button to set this setting as On or Off.
English - 27 -
If the broadcaster enables any special signal concerning the audio, you can set this setting as On to receive such signals. Press " " / " " button to set this function as on or off. Channel List Use " " or " " buttons to go to Channel List option. Use " " or " " buttons to toggle Channel List Mode. If you select "TV Only", with the " " or " " buttons, you navigate through only TV channels. If you select "Radio Only", with the " " or " " buttons, you navigate through only radio channels. If you select "Text Only", with the " " or " " buttons, you navigate through only text channels. To save the recent changes and exit; press the "MENU" button. Active Antenna Use " " or " " buttons to highlight Active Antenna option. When antenna power option is set as On by pressing " " or " " button, +5V will be transmitted to the antenna output. This feature enables the use of active antenna.
Note: Antenna power should be "Off" when standard antenna is used instead of the active antenna.
your receiver automatically. and you do not want to interrupt it, disable auto OAD search by performing the following:
· Press "MENU" button and using the " " or " " buttons to choose Setup and press the OK button. · Highlight Configuration menu with " " or " " keys and press OK. · Use " " or " " buttons to choose "RECEIVER UPGRADE" and press OK button.
· Using the" " or " " button change "Automatic scanning" from Enabled to Disabled. · Highlight "Scan for upgrade" menu with " " or " " keys and pres OK to commence upgrade. · After the search progress is completed, the message " Completed searching for upgrade. No new software was found" appears on the screen if no new software is found. · Do not forget to re enable the automatic OAD function after you have made your recording by repeating the above instructions but this time selecting ENABLE.
Note: Your TV may start in First Time Installation mode after OAD update.
Scan Encrypted (**) (**) For UK only. Scan Encrypted Channel feature will always be ON after performing first time installation. When this setting is on, search process will locate the encrypted channels as well. If it is set as OFF manually, encrypted channels will not be located while in automatic search or manual search. [. . . ] If you switch your PC to an unsupported mode, a warning OSD will appear on the screen.
Note: Resolution modes indicated with (*) are not available for PIP/PAP modes.
Resolution Index 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18* 19* 20* 21* 22 23* 24* 25* 26* 27 28 29* 30 31* 32* 33 34* 35* 36 37* 38 39* 40* 41* Hor 640 640 640 640 640 640 640 640 800 800 800 800 800 800 832 1024 1024 1024 1024 1024 1024 1152 1152 1152 1152 1152 1280 1360 1280 1280 1280 1280 1280 1280 1280 1400 1400 1440 1440 1600 1920 Ver 350 400 400 480 480 480 480 480 600 600 600 600 600 600 624 768 768 768 768 768 768 864 864 864 864 870 768 768 768 960 960 960 1024 1024 1024 1050 1050 900 900 1200 1200 Frequency Ver (Hz) 85 85 70 60 66 72 75 85 56 60 70 72 75 85 75 43 60 70 72 75 85 60 70 75 85 75 60 60 75 60 75 85 60 75 85 60 75 60 75 60 60 Hor (KHz) 37. 9 37. 9 31. 5 31. 5 35. 0 37. 9 37. 5 43. 3 35. 2 37. 9 43. 8 48. 1 46. 9 53. 7 49. 7 35. 5 48. 4 56. 5 57. 7 60. 0 68. 3 53. 8 64. 2 67. 5 77. 1 68. 9 47. 7 47. 7 60. 2 60. 0 75. 0 85. 9 64. 0 80. 0 91. 1 65. 3 82. 3 55. 9 70. 6 75. 0 74. 5 VESA VESA VESA VESA VESA VESA VESA VESA VESA VESA VESA MAC VESA VESA VESA VESA MAC VESA (interlace) VESA VESA Standard VESA VESA IBM VGA VESA MAC VESA VESA VESA VESA VESA
English - 44 -
Appendix B: Supported DVI Resolutions
When connecting devices to your TV's connectors by using DVI converter cables (not supplied), you can refer to the following resolution information.
24Hz 480i 480p 576i 576p 720p 1080i 1080p 25Hz 30Hz 50Hz 60Hz
English - 45 -
Appendix C: AV and HDMI Signal Compatibility (Input Signal Types)
Source Supported Signals PAL 50/60 EXT-1 (SCART 1) NTSC 60 RGB 50 RGB 60 PAL 50/60 NTSC 60 EXT-2 (SCART-2) RGB 50 RGB 60 S-VHS 50 S-VHS 60 FAV PAL 50/60 NTSC 60 480I 480P 576I YPbPr 576P 720P 720P 1080I 1080I 480I 480P 576I 576P HDMI1 HDMI2 HDMI3 HDMI4 720P 720P 1080I 1080I 1080P 1080P 1080P 60Hz 60Hz 50Hz 50Hz 50Hz 60Hz 50Hz 60Hz 60Hz 60Hz 50Hz 50Hz 50Hz 60Hz 50Hz 60Hz 50Hz 60Hz 24 HZ Available O O O O O O X X O O O O O O O O O O O O O O O O O O O O O O O
(X: Not Available, O: Available) Note: In some cases a signal on the LCD TV may not be displayed properly. The problem may be an inconsistency with standards from the source equipment (DVD, Set-top box, etc. ). If you do expereince such a problem please contact your dealer and also the manufacturer of the source equipment.
English - 46 -
Appendix D: Pin Specifications
SCART connector pin specifications
Pin 1 2 3 4 5 6 7 8 9 10 11 Input signal AUDIO OUT (RIGHT) AUDIO IN (RIGHT) AUDIO OUT (LEFT/MONO) AUDIO GND RGB-B GND AUDIO IN (LEFT/MONO) RGB-B IN AUDIO / RGB SWITCH / 16:9 RGB-G GND Not used
RGB-G IN
Pin 12 13 14 15 16 17 18 19 20 21
Input signal
Not used RGB-R GND GND RGB-R / S. VHS CHROMINANCE IN BLANKING SIGNAL COMPOSITE VIDEO GND BLANKING SIGNAL GND COMPOSITE VIDEO OUT COMPOSITE VIDEO / S. VHS LUMINANCE IN GND / SHIELD (CHASSIS)
HDMI connector pin specifications
Pin 1
2 3 4 5 6 7 8 9 10
Input signal TMDS Data2+ TMDS Data2 Shield TMDS Data 2TMDS Data 1+ TMDS Data1 Shield TMDS Data1TMDS Data0+ TMDS Data0 Shield TMDS Data0TMDS Clock+
Pin 11 12 13 14 15 16 17 18 19
Input signal
TMDS Clock Shield TMDS ClockCEC Reserved (N. C. on device) SCL SDA DDC/CED Ground +5V Power Hot Plug Detect
Signal Input
PC RGB Terminal (D-sub 15-pin connector)
Pin
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Input signal
R G or sync on green B No connection No connection R. GND G. GND B. GND No connection GND No connection [SDA] H. sync or H/V composite sync V. sync. [. . . ]