[. . . ] · Pentium 120MHz, 32 MB Ram when running Windows NT4 or 98 Second Edition. When using Windows NT4 please ensure that Microsoft NT4 Service Pack 4 or later is installed. · Pentium 133MHz, 64 MB Ram when running Windows 2000 - 128 MB Ram recommended. A 24-Bit color video card and driver is recommended.
On the CD supplied with your CODUMEFAX 5650 MFP Kit you will find the software that enables you to print, scan, copy and send fax messages from your desktop using your fax machine.
!
Note: These installation instructions apply to all three versions of Unimessage Pro: Unimessage Pro Xlite, Unimessage Pro, and Unimessage Pro LAN.
Before starting software installation, ensure that your fax machine is connected to the parallel printer port on your computer and the fax machine is turned on Save all open documents and close all other applications before proceeding with driver installation.
!
6
Note: Complete your installation of the driver software before installing the PC fax application software.
|
Unimessage Pro
Please note that Unimessage Pro will operate on the above PC configuration; however, this is a minimum. [. . . ] (d) When the Find New Hardware dialog appears, select No, I want to select the hardware from a list and click Next. (e) When the Hardware Type dialog appears, select Ports (COM&LPT) from the list and click Next. (g) When the Install From Disk dialog appears, type D:\DRIVER\SETUP\DISK1\WIN2K (where D is the drive letter of your CD-ROM drive) in Copy manufacturer's files from and click OK. (j) When the Completing the Add/Remove Hardware Wizard dialog appears, click Finish. During copying, the Find Fax Port dialog appears and the fax port is found; then click OK.
10. When the Modem Installation dialog appears, click OK. 11. If the Location Information dialog appears, enter information about your current location and click OK. 12. When the Phone and Modem Options dialog appears, do the following: (a) Open the Modems tab and click Add. (c) Click Have Disk and when Install From Disk dialog appears, type D:\DRIVER\SETUP\DISK1\WIN2K (where D: is the drive letter of your CD-ROM drive) in Copy manufacturer's files from and click OK. (d) When the Install New Modem screen appears, select the appropriate device and click Next. (e) Check Selected ports, select the port displayed in Step 8, and click Next. (g) Click Finish and when the Modems Properties dialog appears, click OK. If this does not happen or you are re-installing the Unimessage software: a) Insert the CODUMEFAX 5650 MFP Option Kit CD-ROM into your CD-ROM drive. b) After the setup program has automatically started, click Setup Unimessage Pro and follow the on-screen instructions. Note: If the setup program does not automatically start or Auto insert notification is turned off, click StartRun. . . . Type in D:\SETUP. EXE (where D is the drive letter of your CD-ROM drive) and click OK. When following the on-screen instructions, make sure you select the following when prompted: Yes, look for devices connected to this computer and install the appropriate drivers and CLASS 1 device
10
|
CODUMEFAX 5650 MFP Option Kit
3. Details of all the installation options can be found in the User's Guide, which is in the Manuals folder on the CODUMEFAX 5650 MFP Option Kit CD-ROM. When the Unimessage Pro installation is complete, you must restart your PC. When your computer restarts, user registration dialogs appear.
Printer Status Icon
The Windows printer driver for your fax machine includes a status monitor, which appears in the system tray on the taskbar. If you close this you cannot fax from the PC, but you can scan and print. For best performance with all MFP functions, we recommend that you leave the status monitor on, except on network clientssee the following page.
Setting up Clients on a Network (Unimessage Pro LAN)
Unimessage Pro LAN can be installed on a client, so you can use an MFP connected to a host on the network. When you do this, do not install the scheduler--only one scheduler can run on a network at a time. [. . . ] Note: When you start Unimessage Pro on a client, you will see a dialog saying "Unimessage Pro is having difficulty communicating with the scheduler over the network. . . Awaiting response from Scheduler. " Click Abort, and Unimessage Pro will start normally.
Setup Guide: English
|
11
MFP as Network Printer
You can also use your MFP as a network printer using Unimessage Pro LAN. Follow these additional steps to set up the host (connected to the MFP) and the client(s) for network printing.
5. When prompted "Do you want this to be the default printer?" select Yes and click Next. On the client, specify the path to the MFP: (a) From SettingsPrinter, right-click the MFP icon. [. . . ]