[. . . ] SPECIFICATIONS AS490e DESCRIPTION A 2-way mid/high system in a trapezoidal enclosure. Includes a horn-loaded 10-in MF cone with Radial Phase PlugTM and a 1. 4-in exit/2. 5-in voice coil HF neodymium compression driver on a 90° x 45° constant directivity horn. [. . . ] SYMBOL INDICATES CENTER OF BALANCE. 24. 62 A & E SPECIFICATIONS The bi-amplified or passive mid/high loudspeaker system shall incorporate a horn-loaded 10-in MF cone with Radial Phase PlugTM and a 1. 4-in exit/2. 5-in voice coil HF neodymium compression driver. The MF driver shall be loaded into a midrange horn constructed of 1/8-in birch plywood backed with high density polyurethane foam. The HF driver shall be loaded on a constant directivity horn with a nominal coverage pattern of 90° (h) x 45° (v). An internal passive filter network shall provide fourth order acoustical crossover and system equalization. System frequency response shall vary no more than ±3 dB from 200 Hz to 15 kHz measured on axis. The mid/high section shall produce a Sound Pressure Level (SPL) of 107 dB SPL on axis at 1 meter with a power input of 1 Watt and shall be capable of producing a peak output of 139 dB SPL on axis at 1 meter. The mid frequency section system shall produce a Sound Pressure Level (SPL) of 109 dB SPL on axis at 1 meter with a power input of 1 Watt and shall be capable of producing a peak output of 141 dB SPL on axis at 1 meter. The high frequency section shall produce a Sound Pressure Level (SPL) of 109 dB SPL on axis at 1 meter with a power input of 1 Watt and shall be capable of producing a peak output of 136 dB SPL on axis at 1 meter. The mid/high section shall handle 450 Watts of amplifier power (continuous) and shall have a nominal impedance of 8 Ohms. The mid frequency section shall handle 400 Watts of amplifier power (continuous) and shall have a nominal impedance of 8 Ohms. [. . . ] The mid/high loudspeaker shall be the EAW model AS490e. 22. 50 GRILLE PARTIALLY SHOWN FRONT (1. 50) C L 4. 00 6. 94 19. 50 C L 11. 00 5. 00 INPUT BACK (12. 29) 10. 09 C L ACCESS PANEL A 11. 00 23. 00 16. 00 4. 00 A 18. 67 30° 30° TOP/BOTTOM 16. 56 4. 63 18. 60 C L 509130 (0) 5/10/01 SIDE VIEW VIEW A-A DIMENSIONS APPLY TO BOTH SIDES Manufacturing tolerances are +/- 0. 13 and +/- 1° One Main Street, Whitinsville, MA 01588 508 234 6158 Toll Free 800 992 5013 EAW products are continually improved. All specifications are therefore subject to change without notice. FAX 508 234 8251 AS490e/2 pp info@eaw. com October 2001 www. eaw. com Printed in USA [. . . ]