[. . . ] Operating and Installation Instructions Vented Dryer T 8002 T 8003 T 8005
To prevent accidents and machine damage read these instructions before installation or use.
UV
M. -Nr. 35
2
IMPORTANT SAFETY INSTRUCTIONS , WARNING - To reduce the risk of
fire, electric shock, or injury to persons when using your appliance, follow basic precautions, including the following: Read all instructions before using the appliance. Do not dry articles that have been previously cleaned, washed, soaked or spotted with gasoline, dry-cleaning solvents or other flammable or explosive substances. Close supervision is necessary when the appliance is used near children. [. . . ] Press the "Start/ Stop T" button to begin the drying program. Close the door properly.
Add fabric softener to laundry when washing or select the "Less Dry" setting on the dryer. What if the drum light does not come on?
Possible fault Fix
The bulb may be bad or burned out.
See "Changing the light bulb. "
What if the "Child Lock" indicator flashes after turning the dryer on and a program cannot be started?
Possible fault Fix
The child lock is activated.
Deactivate the child lock. See "Child Lock. "
What if the program stops, the "Anti-crease / End" indicator lights and the buzzer sounds?
Possible fault Fix
The drum is empty.
Load laundry into the dryer. Single items should be dried with "Sturdy" or a timed program. For dry items use the "Fluff" program.
What if the "Filter/Vent" fault indicator is lit?
Possible fault Fix
The lint filter is clogged. The air supply in the room is insufficient.
18
Clean the lint filters. Open a window or door to increase airflow.
Quick Guide
Remove this guide for easy reference
Please read all instructions, especially the "Important Safety Instructions", before using the dryer.
Quick Guide
1. Select a program
^ Press the "On/Off" button to turn on the dryer.
^ Press the "Door" button to open the door. Make sure that there is enough space in the drum for clothes to tumble freely. Select a drying option (if desired)
To prevent fabric damage, check that laundry will not be caught in the closed door. ^ Close the door with a firm swing - do not push it shut.
^ A drying option can be selected or deselected with each press of the button.
Quick Guide
4. At the end of a program The "Anti-crease / End" indicator will light. ^ Press the "On/Off" button to turn off the dryer.
^ Press the selection button until the desired indicator illuminates.
Quick Guide
Program Normal
Extra Dry
When to use
For laundry to be folded and shelved immediately, e. g. For items to be left damp for ironing.
Note
The "Extra Dry" program should not be selected for jersey materials. Items may shrink.
Available drying options: Turbo, Full load, Gentle, Anti-crease
More Dry Normal Less Dry Hand Iron Rotary Iron
If items are still damp, dry again using "More Dry".
If fabrics are too damp, dry again using "Less Dry".
For items to be ironed with a rotary iron. For items which require ironing.
To prevent moisture loss, roll up the laundry until ready to iron.
Wrinkle-free Available drying options: Turbo, Gentle, Anti-crease
More Dry Normal Less Dry
Reduce load size for fabrics that wrinkle easily.
Special Programs Available drying options: Anti-crease only available in Fluff, Sturdy
Woolens Delicate items which allow machine drying. Take items out immediately after the end of the program while still slightly damp. Allow items to air dry.
Smooth Sturdy Fluff
-
TIMED CYCLES Available drying options: Gentle, Anti-crease
20 min 45 min
-
Frequently asked questions
What if the "Filter/Vent" indicator lights after cleaning the exhaust system?
Possible fault Fix
The dryer is not operating efficiently because the duct hose is too long.
Check the exhaust length and diameter (see "How to calculate the effective duct length"). A long exhaust hose will increase program times and energy consumption. If the exhaust hose cannot be shortened, the indicator can be turned off by a service technician.
What if the program runs too long or stops?
Possible fault Fix
The airflow is insufficient in the area of the dryer. The lint filters are clogged.
Open a window or door to increase airflow. [. . . ] This airflow gap must not be blocked by a toekick or thick piled carpets. The warm air exhausting from the dryer can affect the thermostat of the refrigerator, causing it to run continuously.
29
Installation
Exhaust connection with a flexible exhaust hose or rigid pipe
Using the connector supplied, an exhaust hose (4" [100 mm] diameter) can be installed. Necessary materials: a wall or window duct (available from Miele) an exhaust hose made of approved non-flammable material Window connection
1 Window duct ( (installed in a plexiglass pane) 2 Connector for the flexible exhaust hose Wall connection with rigid pipe
^ Install the exhaust hose or pipe, 2, with the connector, 1, to the dryer.
1 Wall pipe (Installation sheet supplied with the Miele wall pipe) 2 Connector 3 Rigid pipe
30
Installation
Direct wall connection
Necessary materials: a wall pipe flexible foam gasket Dryer top view Dryer side view
1 Wall pipe 2 Flexible foam gasket
1 Wall pipe 2 Flexible foam gasket
^ Connect the flexible foam gasket, 2, to the wall pipe connector, 1. ^ Push the dryer to the wall.
31
Installation
How to calculate the effective duct length
The overall duct length will determine the duct diameter. [. . . ]