[. . . ] 4-269-996-E3(1)
LCD Digital Colour TV
Operating Instructions
Getting Started Using Your BRAVIA TV Network Setup Additional Information
KDL-55EX725 / 46HX725 / 46EX729 / 46EX728 / 46EX727 / 46EX726 / 46EX725 / 46EX525 KDL-46CX525 / 40HX725 / 40EX729 / 40EX728 / 40EX727 / 40EX726 / 40EX725 / 40EX525 KDL-40CX525 / 37EX725 / 37EX525 / 32EX729 / 32EX728 / 32EX727 / 32EX726 / 32EX725 KDL-32EX525 / 32EX425 / 32CX525 / 26EX325 / 24EX325 / 22EX325
Introduction
Thank you for choosing this Sony product. Before operating the TV, please read this manual thoroughly and retain it for future reference. The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. [. . . ] For two satellite channels, you need to set "Toneburst A" (1st satellite) and "Toneburst B" (2nd satellite) in the "DiSEqC Control" setting.
Follow the instructions on the screen.
14 GB
Or you can use DiSEqC command A (1st satellite) and B (2nd satellite), if your LNB or multi switch can handle these commands. For four satellite channels, DiSEqC control A, B, C, and D is required. "LNB Low Band Frequency" and "LNB High Band Frequency": Specifies LNB frequency bands. Be sure to check your LNB documentation to set frequencies (normally appears as "L. O. If your LNB can handle both bands (low and high), you can specify both. "22 kHz Tone": If your LNB is dual band (low and high bands), set to "Auto". The TV will take care of everything automatically; otherwise, set to "Off". "LNB Voltage": Specifies the set voltage for a dual polarisation LNB. 3 "Transponder" (for each satellite setting- Satellite 1 to 4): There is no need to set the transponder when you select "Full Scan". "Scan for new services": Tunes to a single transponder. This is an incremental scan, and it should be used in cases when a new transponder is added to a satellite. Previously-tuned programmes are kept and found ones are added to the program list of the satellite connection you are editing.
Digital Auto Tuning: When you select "Cable", we recommend that you select "Quick Scan" for quick tuning. Set "Frequency" and "Network ID" according to the information supplied from your cable provider. If no channel is found using "Quick Scan", try "Full Scan" (though it may take some time).
~ · "Full Scan" may not be available depending on your region/country.
For a list of compatible cable providers, refer to the support web site: http://support. sony-europe. com/TV/ DVBC/ Programme Sorting: Changes the order of analogue channels stored in the TV.
Getting Started
1 2
Press F/f to select the channel you want to move to a new position, then press . Press F/f to select the new position for the channel, then press .
~ · For satellite channels, select "Satellite Programme Sorting" in "Digital Set-up" of "Settings" to change the order of satellite channels in the same procedure above after initial set-up completed. · You can also tune channels manually.
1 2
Press HOME, then select > "Digital Set-up" > "Satellite Auto Tuning". Follow the instruction on the Satellite Auto Tuning.
~ · "Scan for new services" is unavailable while performing the initial set-up. · When you scan for the new services, please check if the satellite signal is available.
15 GB
Using Your BRAVIA TV
Watching the TV
1 2
1
Turn on the TV.
Press 1 on the TV to turn on the TV.
Select a mode.
3
Select a TV channel.
2
GUIDE
To use Digital Electronic Programme Guide Press GUIDE in digital mode to display the programme guide.
3
Use with 0-9 to select digital channels. For channel numbers 10 and above, press the next digit quickly.
z · The number 5, N, PROG + and AUDIO buttons on the remote have a tactile dot. Use the tactile dots as a reference when operating the TV.
16 GB
Parts and controls of the remote
Use the supplied remote to control your TV. For details on all of the remote function, press i-MANUAL and see the built-in manual (i-Manual) (page 20). 3 SYNC MENU Displays the BRAVIA Sync Menu to operate the BRAVIA Sync-compatible equipment that is connected to the TV. [. . . ] · To ensure proper ventilation and prevent the collection of dirt or dust: Do not lay the TV set flat, install upside down, backwards, or sideways. Do not cover the TV set with a cloth, such as curtains, or items such as newspapers, etc. · Do not pull on the mains lead itself when disconnecting the mains lead. · Do not use a poor fitting mains socket.
Screw (supplied with the Wall-mount bracket) Mounting Hook Hook attachment on rear of TV set
Prohibited Usage
Do not install/use the TV set in locations, environments or situations such as those listed below, or the TV set may malfunction and cause a fire, electrical shock, damage and/or injuries.
Transporting
· Before transporting the TV set, disconnect all cables. [. . . ]