[. . . ] [. . . ] When connecting the EVID 3. 2 SOS to the amplifier, make sure that the amplifiers power output does not exceed this rating. MA-3 Kit Includes: Item 1 2 3 Qty 1 1 2 Description Mic Stand Adapter Boom Adapter Flat Washer (. 88" O. D. , . 25" I. D. ) EVID 3. 2 SOS Monitor Includes: Item 1 2 3 4 5 Qty 1 1 2 1 1 Description Mic Stand Adapter Boom Adapter Flat Washer (. 88" O. D. , . 25" I. D. ) EVID 3. 2 Monitor, with 1/4" Jack Shock-Proof Microphone Mount Positioning for Boom and Microphone EVID 3. 2 SOS Rear Panel Detail 1/4" Input Jack Volume Control Knob Correct Incorrect *To ensure proper balance, when a boom and microphone are attached, the EVID must be angled upward and the booms counterweight properly positioned as shown. Mic Stand Mounting (MA-3 and SOS) Logo Cap (Included with standard EVID 3. 2) Step 1: Attach the Mic Stand Adapter (Item 1) to your microphone stand (not included). Step 2: Attach the EVID 3. 2 (or the 3. 2 SOS) to the Mic Stand Adapter using one flat washer (Item 3) in-between the Adapter and the EVID. Item 4 Item 3 Adjustment Knob Step 3: Use the adjustment knob to adjust the angle of the EVID. If not attaching a boom to the EVID, attach Logo Cap as shown. Item 1 Mounting a Microphone and Boom to your EVID (MA-3 and SOS) Step 1: Attach the Boom Adapter (Item 2) to the top of the EVID with a flat washer (Item 3) in between the Adapter and the EVID. Boom (Not Included) Step 2: Mount the Boom (Not Included) to the Boom Adapter (Item 2). Item Item 2 3 Item 5 (Included only with EVID 3. 2 SOS Monitor Package) Item 4 Step 3: Replace any microphone mount with the Shock-Proof Mic Mount (Item 5, EVID 3. 2 SOS only). Item 1 12000 Portland Avenue South, Burnsville, MN 55337 Phone: 952/884-4051, Fax: 952/884-0043 www. electrovoice. com © Telex Communications, Inc. For customer orders, contact the Customer Service department at 800/392-3497 Fax: 800/955-6831 Europe, Africa and Middle East only. [. . . ] [. . . ]