[. . . ] The Co11 is the ideal vocal microphone for anyone that appreciates the crisp high end and warm proximity effect that can only come from a top performing condenser microphone. [. . . ] Besides great sound, the Co11 features a high compliance shock mount that makes handling noise "go away", and comes in a rugged die cast housing with the famous EV Memraflextm dent resistant grille screen. Best of all, the Co11 does all this at a price anyone can afford! Condenser Vocal Microphone Specifications Element Frequency Response Polar Pattern Impedance Sensitivity Open Circuit Voltage Self-Biased Condenser 50 Hz to 20 kHz Cardioid Low-Z balanced (250 Ohms) 4. 0 mV/PA (-48 dBV) re 1 Pa* CobaltTM Co11 Clipping Level, 1KHz Maximum SPL, 1 KHz -3 dBV 130 dB SPL (1% THD) 26 dBA 113 dB 68 dB (@ 94 dB SPL) 3-pin, XLR-type Pin 2 positive, referenced to pin 3 with positive pressure on diaphragm Self-Noise Dynamic Range, (Maximum SPL to A Weighted noise level) Signal-to-Noise Ratio Microphone Connector Polarity Power Finish/Materials Dimensions Length Diameter Shank Weight, Net Accessories included Phantom Supply Requirement: 24 to 48 Vdc, positive at pins 2 & 3, Current Drain: Up to 10 mA Durable Polyurethane painted, die cast zinc 6. 8 in. For customer orders, contact Customer Service at: + 49 9421-706 0 Fax: + 49 9421-706 265 Other International locations. For customer orders, contact Customer Service at: + 1 952 884-4051 Fax: + 1 952 736-4212 For warranty repair or service information, contact the Service Repair department at: 800/553-5992 or 402/467-5321 For technical assistance, contact Technical Support at: 800/392-3497 or 952/736-4656 Specifications subject to change without notice. [. . . ] For customer orders, contact Customer Service at: + 49 9421-706 0 Fax: + 49 9421-706 265 Other International locations. [. . . ]