[. . . ] Xi-1122A/85F 12-InchTwo-Way, Full-Range 80° x 55° Sound Reinforcement System Key Features: · · · · · · · · Ultra-Compact/High-Level, Two-Way Design DL12ST 12" LF Driver ND6 3" Diaphragm HF Compression Driver 80° x 55° Coverage Pattern Built-In L-Track Rigging on Top and Bottom Ring-Mode Decoupling / RMDTM Integrated Stand Mount Available in Black and White General Description: The Electro-Voice Xi-1122A/85F is a second-generation loudspeaker system ideal for professional touring or installation applications requiring accurate, high-level sound reinforcement from a very compact enclosure. [. . . ] Download at www. electrovoice. com Xi-1122A/85F Full Range Loudspeaker Frequency Response (Full & Half Space): Impedance: Beamwidth: Horizontal Off Axis Frequency Response: Directivity: Vertical Off Axis Frequency Response (Up): Wiring Diagram: Vertical Off Axis Frequency Response (Down): Engineering Data Sheet Horizontal 1/3 Octave Polars: Vertical 1/3 Octave Polars: Dimension Drawings: CAUTION This Xi Loudspeaker should be suspended overhead only in accordance with the procedures and limitations specified in the X-Array Xi Install Flying Manual and possible manual update notices. This system should be suspended with certified rigging hardware by an authorized rigging professional and in compliance with local, state, and federal overhead suspension ordinances. Performance Match (Amplifiers) Xi-1122A/85F Part Numbers · · 1061-3429 - Black 1061-3432 - White Architectural & Engineering Specs: · P3000 (RL) · P1200 (RL) · CPS 2. 8 · CPS 2. 11 The loudspeaker system shall be a two-way bi-amp system. The system shall have an 12-inch, low-frequency loudspeaker with a nominal impedance of 8 ohms and a 3-inch aluminum voice coil. The low-frequency loudspeaker shall be a 12-inch driver with a 2. 5inch voice coil and a nominal impedance of 16 ohms. The low-frequency driver shall have a power-handling capacity of 300 watts for 8 hours (as per ANSI/EIA RS-426 A & AES 2-1984). The high-frequency section shall employ a compression driver capable of handling 150 watts, 1, 760- to 20, 000-Hz when pink noise of a 6-dB crest factor is applied for 2 hours (as per AES 2-1984 and ANSI S4. 26-1984 standards). The loudspeaker shall be constructed of 18-mm, 13-ply birch and shall be trapezoidal in shape. The grille shall be constructed from 16 GA powder-coated steel backed by acoustically transparent fabric. [. . . ] For customer orders, contact Customer Service at: + 1 952 884-4051 Fax: + 1 952 736-4212 For warranty repair or service information, contact the Service Repair department at: 800/685-2606 For technical assistance, contact Technical Support at: 866/78AUDIO Specifications subject to change without notice. 12000 Portland Avenue South, Burnsville, MN 55337 Phone: 952/884-4051, Fax: 952/884-0043 www. electrovoice. com © Telex Communications, Inc. [. . . ]