[. . . ] Warranty card/Registration card (not provided in some areas) Safety Precautions (booklet) SmartMedia Static-free case Index labels (2 pieces) Write-protect adhesive seals (4 pieces) SmartMedia instructions
1
Make sure that:
The lens barrier is closed. The monitor is off.
3
When playing back pictures on the camera
Power on: Press the (monitor) button with the lens barrier closed. The camera turns on in the playback mode (the monitor turns on).
With the lens barrier closed Card insertion direction mark
Loading the batteries
1
Make sure that:
The lens barrier is closed. [. . . ] The camera turns off (the monitor turns off).
Insert the card as far as it will go in the direction shown in the illustration.
There is an arrow inside the card cover, indicating the direction in which the card should be inserted.
Power ON
Power OFF
OLYMPUS AMERICA INC.
Two Corporate Center Drive, Melville, NY 11747-3157, U. S. A. 631-844-5000 24/7 online automated help: http://support. olympusamerica. com/ Phone customer support: Tel. (EUROPA) GMBH.
Premises/Goods delivery: Wendenstrae 14-18, 20097 Hamburg, Germany Tel. 040-237730 Letters: Postfach 10 49 08, 20034 Hamburg, Germany
Slide the battery compartment cover in the direction of (the direction indicated by the mark on the cover), and lift it up in the direction of .
4
Battery insertion direction mark
Close the card cover securely until it clicks. Removing the card
Hold the card with your fingertips and pull it out in the direction of the arrow.
3
Insert the batteries, making sure that they are correctly oriented as shown in the illustration.
When using AA (R6) batteries When using lithium battery packs
http://www. olympus. com/
Printed in Japan 1AG6P1P1295-VT348201
Never open the card cover, or remove the card or the batteries while the camera is turned on. Destroyed data cannot be restored.
· If you open the lens barrier without the card inside the camera, the NO CARD appears on the monitor. In this case, you can record pictures in the camera's internal memory. · To save battery power, the camera automatically enters the sleep mode after about 3 minutes of non-operation. · Protection on each picture remains even when the camera is turned off.
· Protected pictures cannot be erased by the single-frame/all-frame erase function, but they can be all erased with the format function. · Protection cannot be applied to pictures stored on a card with a writeprotect seal.
SEt CARD EDIt PLAY
The selected picture is protected. To close the menu, press twice.
SEt CARD EDIt PLAY
3
Target mark
Green lamp
Record the movie while observing your subject on the monitor.
Press the shutter button fully to start recording. Press the shutter button fully again to stop recording.
Press then press
to select the PLAY tab, .
OFF ON
qsge_quick. fm Page 2 Thursday, February 7, 2002 7:14 PM
Names of parts
Shutter button Lens Flash DC-IN jack Connector cover
Using the menus and tabs
When you turn on the camera and press the (OK/Menu) button, the top menu is displayed on the monitor. The functions of this camera are set from the menus.
Press .
Shortcut menus
Shooting mode
When the still picture shooting mode is selected When the movie recording mode is selected
Playback mode
When a still picture is played back When a movie is played back
DRIVE MODE MENU FUNCtION
DRIVE MODE MENU
MOVIE PLAYBACK
The top menu is displayed.
INFO
MODE MENU ERASE
INFO
MODE MENU ERASE
Lens barrier Turns the camera on and off in the shooting mode.
USB connector Self-timer lamp Macro lever
DRIVE MODE MENU FUNCtION
Select each menu using the arrow pad.
DRIVE
Lets you shoot one frame at a time (normal shooting). Displays all recorded pictures in slide-show fashion.
Green lamp Viewfinder Monitor Strap eyelet Target mark Card cover
MOVIE PLAYBACK
Plays back a movie.
Shortcut Menus
· Let you quickly access the most frequently used menu settings. · Display operational buttons at the bottom of the screen, and let you select items by pressing .
Mode Menu
· Lets you access the menu selections to set the metering, white balance, etc. Select the desired tab on the left of the screen by pressing .
Lets you select the resolution and the quality of the image. [. . . ] Still picture : SHQ, HQ, SQ1, SQ2 Movie : HQ, SQ
INFO
Displays all the shooting information on the monitor.
FUNCTION
2 IN 1 Lets you combine two still pictures taken in succession into one picture. Self-Portrait mode: Lets you take a picture of yourself while holding the camera.
ERASE
Erases a selected picture.
Battery compartment cover Arrow pad Tripod socket (OK/Menu) button (Monitor) button Turns the camera on and off in the playback mode.
SHQ 1600*1208 HQ 1600*1200 SQ1 1024*768 SQ2 640*480 CANCEL SELECt GO
SEt CARD PIC CAMERA
Tabs
MEtERING
PANORAMA
Allows panorama pictures to be taken with Olympus CAMEDIA-brand SmartMedia cards.
How to use the menus
1
Press to display the top menu, then press . Top menu
Mode menus
2
Press to select a tab, then press to display the menu.
3
CAMERA tab
PLAY tab EDIT tab
SEt CARD PIC CAMERA
DRIVE MODE MENU FUNCtION
SEt CARD PIC CAMERA
SEt CARD PIC CAMERA
MEtERING
MEtERING
CAMERA tab PICTURE tab CARD tab SETUP tab
CAMERA tab
MEtERING
CARD tab SETUP tab
PLAY tab
PICTURE tab
To return to select a tab, press .
Protects pictures from accidental erasure. [. . . ]