[. . . ] [. . . ] Connect the 4-pin floppy connector of the Y-power cable provided to the 4-pin floppy power connector on the internal micro SATA PCB. Power & drive activity LED III. LED information When power is provided to the Internal Micro SATA UDD, the power LED will light up. The drive activity LED will blink when files are accessed and transferred on the drive. J6 ­ Power source jumper block Place jumper on Pins 1-2 (default) when connecting via USB 5pin header Place jumper on Pins 2-3 when connecting via SATA I. Mounting the Internal Micro SATA UDD on a 3. 5" drive bay Using the screws provided, mount the bracket on a 3. 5" drive bay on the system II. Connecting cables Note: When both SATA and USB connections are used, USB takes precedence over SATA. USB 5-pin header connection Connect the USB cable provided to the USB 5-pin header on the internal micro SATA PCB and the other end to the USB header on the motherboard. [. . . ] [. . . ]