[. . . ] [. . . ] DM 100I Floor-standing loudspeaker system Product Summary q The DM 100I is one of a series of new loudspeakers which together form the B&W DM range for the eighties. The design brief for the entire range was to benefit from the most sophisticated high technology tools. q The DM 100I follows the frequency linearity, freedom from all forms of distortion and colouration must be to monitor standard, and that the model should be fitted with audio powered overload protection. Technical highlights q The driver configuration chosen consists of two 150mm bass/midrange drivers operating in a totally sealed enclosure, designed so as to ensure a low Q, well damped third order high pass characteristic. q The HF section utilises the TW26 high frequency transducer. All the DM 100I drivers are over engineered so work totally within their limits of power output, frequency response and dispersion. q The DM 100I employs acoustic suspension rear loading for the bass/midrange drivers. No upper limit because of overload protection device Dimensions Height: 567mm Width: 256mm Depth: 295mm Finish Standard: teakor walnut Special: black ash or rosewood Frequency Response 80Hz ­ 20kHz ± 2dB free-field B&W Loudspeakers Ltd reserves the right to amend details of the specifications without notice in line with technical developments. [. . . ] [. . . ]