[. . . ] It can cause injury to human, problem to product and damage the display. To Prevent Fire or Hazards: Always turn the display OFF if you leave the room for more than a short period of time. Keep children from dropping or pushing objects into the display's cabinet openings. When the display is to be left unattended for an extended period of time, unplug it from the wall outlet. [. . . ] Be careful with the cables when rotating the screen.
8
Connecting the Display Connecting with the PC
1. Before setting up the monitor, ensure that the power to the monitor, the computer 2. Connect signal input cable 1
system, and other attached devices is turned off. A Connect DVI-D(Digital signal) Cable B Connect D-sub(Analog signal) Cable
2
in order, then tighten the screw
NOTE
This is a simplified representation of the rear view. This rear view represents a general model; your display may differ from the view as shown.
When using a D-Sub signal input cable connector for Macintosh
Mac adapter : For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-sub VGA connector on the supplied cable to a 15 pin 2 row connector.
Varies according to model.
Connect the signal input cable and tighten it up by turning in the direction of the arrow as shown in the figure.
Wall-outlet type
DVI-D (This feature is not available in all countries. )
3. When monitor power is
turned on, the 'Self Image Setting Function' is executed automatically. (Only Analog Mode)
Power Button
NOTE
` Self Image Setting Function'?This function provides the user with optimal display settings. When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals. When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen while using the device or after changing screen resolution, press the AUTO function button to improve resolution.
9
Control Panel Functions Front Panel Controls
MENU Button
OSD LOCKED/UNLOCKED This function allows you to lock the current control settings, so that they cannot be inadvertently changed. You can unlock the OSD controls at any time by pushing the MENU button for several seconds. The message "OSD UNLOCKED" should appear.
10
Control Panel Functions
MODE Button
Use this button to enter F-ENGINE, ORIGINAL RATIO, PHOTO EFFECT menus. For more information, refer to page 18.
AUTO Button
AUTO IMAGE ADJUSTMENT When adjusting your display settings, always press the AUTO button before entering the On Screen Display(OSD). (Only Analog Mode) This will automatically adjust your display image to the ideal settings for the current screen resolution size (display mode). The best display mode is E2210P:1680 x 1050
INPUT Button
(SOURCE Hot key)
When two input signals are connected, you can select the input signal (D-SUB/DVI) you want. The default setting is D-Sub.
EXIT Button
Exit the OSD(On Screen Display).
Power Button & Use this button to turn the display on or off. Power Indicator
The power indicator stays white if the display is running properly (On Mode). If the display is in Sleep Mode (Energy Saving), the power indicator is blinking white.
11
On Screen Display (OSD) Control Adjustment Screen Adjustment
Making adjustments to the image size, position and operating parameters of the display is quick and easy with the On Screen Display Control system. A short example is given below to familiarize you with the use of the controls. The following section is an outline of the available adjustments and selections you can make using the OSD.
To make adjustments in the On Screen Display, follow these steps:
MONITOR SETU P
AUTO
MENU
MODE
AUTO
INPUT
EXIT
MENU
PICTURE
BRIGHTNESS CONTRAST
MONITOR SETU P
100 70 5
SHARPNESS
AUTO
MENU
MODE
AUTO
INPUT
EXIT
EXIT
1
2 3 4
Press the discretionary Button, then the main menu of the OSD appears. This item allows you to remove any horizontal noise and clear or sharpen the image of characters.
16
On Screen Display(OSD) Selection and Adjustment
Main menu Sub menu Description
LANGUAGE
To choose the language in which the control names are displayed. Use this function to set the power indicator on the front side of the monitor to ON or OFF. If you set ON at any time, the power indicator will automatically be turned on. [. . . ] After moving the product to face
downward, make sure to place it on a soft cloth or a cushion to avoid surface damage.
2. Separate the head and the stand with
the use of a screwdriver.
27
Installing the Wall mount plate
3. Install the Wall mount plate.
Wall mount plate(Separate purchase) This is stand-type or wall mount type and is connectable with Wall mount plate. Please refer to the installation guide for more details, which is provided when Wall mount plate is purchased.
Wall Mount pad
<Screw Mounting Interface Dimension> Hole spacing : 75 mm x 75 mm.
Kensington Security Slot Connected to a locking cable that can be purchased separately at most computer stores.
NOTE VESA compatible only with respect to screw mounting interface dimensions and mounting screw specifications Please use VESA standard as below. [. . . ]