[. . . ] Lay the power cable in such a way that no one can tread on or trip over it. ⷠThis appliance is not intended for use by individuals (including children) with restricted physical, physiological or intellectual abilities or deficiences in experience and/or knowledge unless they are supervised by a person responsible for their safety or receive from this person instruction in how the appliance is to be used. ⷠChildren should be supervised to ensure that they do not play with the appliance. [. . . ] This appliance could lose its dimmer function upon contact with conductive objects. As soon as the conductive object is removed, the appliance functions again without problem. 1 Bulb (not supplied) 2 Lamp shade 3 Socket 4 Base with touch sensor as on/off switch and dimmer 5 Power cable 6 Covering cap (KH4113 only) Illustrations of the KH4112 and KH4114 table lamps are on the front-out fold side. to avoid malfunctioning , do not place the table lamp on metallic surfaces. Do not place any easily inflammable/combustible materials in the immediate vicinity of the table lamp while it is switched on. Switch the table lamp on by touching the base 4 with a finger (KH4113: touch the base 4 or the stand). To switch it to the second brightness level: touch the base 4 a second time. Thereby, do not touch the bulb with your bare hands, instead, use a soft and lint-free cloth. ⷠTo switch it on to the third brightness level: Touch the base 4 once again. ⷠTo switch the table lamp off: touch the base 4 once again. If you do not wish to use the table lamp for an extended period of time: Remove the power cable 5 from the power socket. KH 4112/KH 4114: Screw the light bulb 1 (not supplied) into the bulb holder 3. Thereby, do not touch the bulb with your bare hands, instead, use a soft and lint-free cloth. Should the bulb 1 in the table lamp be defect, it must be exchanged for a new one. additionally: · Remove the power cable 5 of the table lamp from the power socket. If the table lamp was previously switched on: Allow the lamp shade 2 and the light bulb 1 at least a half-hour to cool down before you continue. ⷠKH 4112/KH 4114: Screw the light bulb 1 out of the bulb holder 3 in an anti-clockwise direction. Thereby, do not touch the bulb with your bare hands, instead, use a soft and lint-free cloth. [. . . ] The warranty period will not be extended by repairs made under warranty. Any damage and defects extant on purchase must be reported immediately after unpacking the appliance, at the latest, two days after the purchase date. Repairs made after the expiration of the warranty period are subject to payment. [. . . ]