[. . . ] Wear protective glasses, hearing protection, protective gloves and sturdy shoes. Pneumatic Drill Hammer Article number Input power Output power Electronic speed control No-load speed Speed under load Impact frequency under load during hammer drilling Impact energy Right/Left rotation Clamping collar dia. [. . . ] INSERTING TOOLS Before any work on the machine itself, pull the mains plug!The chisel can now be turned by hand to the required working position. The chisel latches automatically as soon as it is radially loaded by the working or chiselling process. IMPACT DRILLING - CHISELING Wear protective glasses and hearing protection. The most effective method for chiselling is to break out only small pieces of material. When chiselling, work only with protective glasses and the auxiliary handle 12. Check before starting to work if the rotation stop switch 4 is engaged in the position. SCREWDRIVING Screwdriver bits can be inserted into the adapter 13 (accessory). For drilling work in metal, wood and plastic with drills that have normal shafts, a drill chuck (13 mm max. All common drill chucks with 1/2" x 20 UNF internal threads (13 mm max. MOUNTING THE CHUCK Before any work on the machine itself, pull the mains plug! clean the threads of the drill chuck (accessory) and the adapter 13 (accessory). [. . . ] If the tool is defective, please complete the guarantee card and return the unit, guarantee card and a brief description of the problem to the responsible service location. The guarantee obligations assumed by us shall exclude any further claims on the part of the buyer, in particular the right to recission of a sale, reduction and the assertion of damage claims. [. . . ]