[. . . ] The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
FCC NOTICE
· A Class B digital device
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ] Press the APC button repeatedly to select the picture appearance setup option as shown below.
Clear Optimum Soft User
· You can also adjust APC in the VIDEO menu. · Clear, Optimum, and Soft settings are preset for optimum picture quality at the factory and cannot be changed.
Manual Picture Control (User option) (
- You can adjust picture contrast, brightness, color, sharpness, and tint to the levels you prefer. Press the MENU button and then use
D /E
button to select the VIDEO menu.
VIDEO AUDIO
2. Press the G button and then use D / E button to select the desired picture option (Contrast, Brightness, Color, Sharpness, or Tint). Contrast Brightness Color Sharpness Tint 85 60 50 50 0
G
TIME SPECIAL
button to make appropriate adjustments.
SCREEN TWIN
MENU Prev.
Auto Color Temperature Control
- To initialize values (reset to default settings), select the Normal option. - When adjusting color temperature options (red, green, and blue) manually, ACC automatically changes to User. Press the
G D /E
button to select the VIDEO menu.
VIDEO AUDIO TIME SPECIAL SCREEN TWIN
APC ACC Color temp. Contrast Brightness Color Sharpness Tint
G
button and then use
D /E
button to select ACC .
3. Press the G button and then use D / E button to select either Normal (Default), Cool (Preset), Warm (Preset), or User (Manual Adjustment). Press the OK button to save.
85 60 50 50 0
Normal Cool Warm User
MENU Prev.
Manual Color Temperature Control (User option) (
- You can adjust red, green, and blue to any color temperature you prefer. Use the
G F /G D /E
button to select the VIDEO menu.
VIDEO AUDIO TIME SPECIAL SCREEN TWIN
D /E /E
button to select the Color temp . - This feature can be used to prevent unauthorized viewing by disabling the front panel controls. - This Monitor is programmed to remember which option it was last set to even if you turn the monitor off. Press the
G D /E
button to select the SPECIAL menu.
VIDEO AUDIO TIME SPECIAL
Language Key lock ISM Method Low power Set ID. OSD Rotate
G
button and then use
D /E
button to select Key lock.
On Off
3. Press the G button and then use
D /E
button to select On or Off.
W Key lock'
· When you select On, the display ` on the front panel is pressed. Press the OK button to save.
appears on the screen if any button
SCREEN TWIN
MENU Prev.
-In setting Key lock `On', if the monitor is turned off with the remote control, press the INPUT SELECT button on the monitor or POWER, INPUT SELECT on the remote control to turn the monitor on.
ISM (Image Sticking Minimization) Method
- A frozen still picture from a PC/video game displayed on the screen for prolonged periods will result in an ghost image remaining; even when you change the image. Avoid allowing a fixed image to remain on the Monitor's screen for a long period of time.
VIDEO
1. Press the
G
D /E
button to select the SPECIAL menu.
AUDIO TIME SPECIAL SCREEN TWIN
Language Key lock ISM Method Low power Set ID. OSD Rotate
G
button and then use
D /E D /E
button to select ISM Method. Press the G button and then use Orbiter, or Inversion.
Normal White wash Orbiter Inversion
· Normal If image sticking is never a problem, ISM is not necessary - set to Normal.
MENU Prev.
· White wash White Wash removes permanent images from the screen. Note: An excessive permanent image may be impossible to clear entirely with White Wash. [. . . ] PIP Input Select (Command2:y)
G To select input source for sub picture in PIP mode. Transmission [k][y][ ][Set ID][ ][Data][Cr] Data 0: RGB 2: Video Acknowledgement [y][ ][Set ID][ ][OK][Data][x] 1: Component 3: S-video 4: DVI
29. Orbiter Time Setting (Command2:r)
G To adjust orbiter operation time term. Transmission [j][r][ ][Set ID][ ][Data][Cr] Data Min: 1 ~ Max: FE Acknowledgement [r][ ][Set ID][ ][OK][Data][x]
26. [. . . ]