[. . . ] Visual Display Panel - shows the caller's name and / or number, incoming call time & date, Call Counter, New Call icon (NEW) and Voice Mail icon ( ). You also use this button to set language, area code, time and date and LCD display contrast. TELEPHONE Jack - connect line cord from your telephone into the jack labeled PHONE at the back of your caller ID unit. TEL LINE Cord Jack - insert one end of the telephone line cord into the jack labeled TEL. [. . . ] Note : If you want to change your voice mail access number, repeat the steps 1-4. CALLER ID MEMORY If you have subscribed to the Caller ID service from your local telephone company, your Caller ID unit will receive and display incoming caller's name (if applicable) and number together with the date and time of the call. It stores up to 90 records, each of which contains up to 14digit number and 15-character name. When the Caller ID memory is full, the oldest Caller ID record will be deleted automatically to make room for the new one. Sequence number of this incoming call It is a new call Time and date when this call was received. Press [REVIEW ] button to view the Caller ID record from the newest call (i. Press [REVIEW ] button to view the Caller ID record from the oldest (#01) to the newest (i. C) If the area code of a caller's number matches your pre-set local area code, only the last 7 digits will be shown on the LCD display. (refer to the "Set Area Code" section on page 7) NEW CALL LIGHT INDICATOR (Green) When your caller ID unit receives a new incoming call, the new call icon "NEW" appears on the LCD display and the New Call Light Indicator (Green LED) lights up steadily. The LCD display also shows the information of the new incoming call for about 10 seconds and then returns to the idle mode. Note : a) You or your answering machine must answer the new incoming call only after the first ring. Otherwise, the information of the new incoming call will not be registered. B) If the AC adapter is not connected, the New Call Light Indicator will flash every 3 seconds when there is new call not yet reviewed. You have new voice mail message(s) C) The New Call Light Indicator does not stop lighting up unless you have reviewed ALL new incoming calls by pressing [REVIEW ] or [REVIEW ] button. VOICE MAIL If you have subscribed to Voice Mail service from your local telephone company, the Message Waiting Light Indicator lights up steadily when you have voice mails in your mailbox, and the LCD icon ( ) appears on the LCD display. After you have listened to your voice mails, the Message Waiting Light Indicator and the LCD icon ( ) will turn off. To listen to your voice mails, press [DIAL VM] button to dial your voice mail access number. IMPORTANT: a) If the AC adapter is not connected, the Message Waiting Light Indicator will flash every 3 seconds when you have new voice mail(s). B) If the Message Waiting Light Indicator keeps on lighting up and the LCD icon ( ) still appears after you have listened to all your voice mails, press [DELETE] button to turn off the light and the LCD icon. LONG DISTANCE CALL If there is a long distance incoming call, "LONG DISTANCE" appears alternatively with the caller's name. When reviewing a Caller ID record, press [DIAL] button to dial the number shown on the LCD display. If the number format of the Caller ID is not adjustable, the LCD display shows "PICK UP HANDSET". [. . . ] Other limitations This warranty is the complete and exclusive agreement between you and Philips. No one is authorized to make modifications to this warranty and you should not rely on any such modification. State Law Rights: This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Limitations: Implied warranties, including those of fitness for a particular purpose (an unwritten warranty that the product is fit for ordinary use) and merchantantability are limited to one year from date of purchase. [. . . ]