[. . . ] OWNER'S MANUAL
Dome Camera
Please read this manual carefully before operating your set and retain it for future reference.
MODELS LT913 Series LT713 Series
P/NO : MFL66281613
2
Safety Information
1
Safety Information
1 Safety Information
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. REGULATORY INFORMATION: FCC Part 15 This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. [. . . ] Assemble the camera and ceiling mounting bracket by following step a and b. Align the locking point of the surface mounting bracket and the camera.
Installation
25
7. Tighten the locking screw.
Wall mount (optional)
Install the camera by the following order. Disassemble the PIPE Installation Bracket to remove the [A] part.
[A]
8. After installing the camera, you should arrange the cables using the outlet box to protect the cables.
2. Install the PIPE Installation Bracket to the Wall Mount assembly.
3
Installation
CAUTION
Do not expose the connected part of the camera cable jacks in the rain or moisture. Check the red stripe on one side of the safety cable.
26
Installation
3. Pass the connection cable through the wall mount assembly so that they hang down.
3
Installation
Red Stripe
5. Connect the connection cable and the safety cable to the camera body.
Installation
27
7. Attach the camera to the camera assembly bracket by following step a and b. Align the locking point of the wall mount assembly and the camera.
9. Tighten the locking screw.
NOTE
You can install the PIPE Installation Bracket direct to the other type LG Wall Mount assembly. This LG Wall Mount assembly make to easy to install your camera.
28
Installation
Pendant mount (Optional)
Install the camera by the following order. Disassemble the PIPE Installation Bracket to remove the [A] part.
3. Connect the safety cable to the pendant mount assembly.
[A]
Red Stripe
3
Installation
2. Install the PIPE Installation Bracket to the Pendant Mount assembly.
Installation
29
4. Pass the connection cable through the pendant mount assembly so that they hang down.
5. Connect the connection cable and the safety cable to the camera body.
30
Installation
7. Attach the camera to the camera assembly bracket by following step a and b. Align the locking point of the wall mount assembly and the camera.
9. Tighten the locking screw.
Installation
31
NOTE
You can install the PIPE Installation Bracket direct to the other type LG Wall Mount assembly. This LG Wall Mount assembly make to easy to install your camera.
3
Installation
32
Operation
4 Operation
Setup Menu Overview
The following table shows the list of menu items and options. [. . . ] The camera will move to the home position.
NOTE
If you set [AUTO RETURN] to [ON], the [HOME POSITION] option is set to [OFF] automatically and you can not use it.
Tilt limit
You can specify the tilt range. If you set this function, the camera is able to tilt from 15º to 165º. If you do not want to use this function, set it to [OFF].
Communication
This setting is required to establish a connection between the system controller and the camera. · · Protocol: This item lets you set a protocol for RS-485 communication. [. . . ]