[. . . ] · Whentwoinputsignalsareconnected, youcanselecttheinputsignal(D-SUB/DVI/ HDMI) you want. · Whenonlyonesignalisconnected, itisautomaticallydetected. Thedefaultsettingis D-SUB. Power Indicator The power indicator stays blue if the display is running properly (On Mode). If the display is in Sleep Mode, the power indicator blinks blue.
INPUT
EXIT (Power Button)
6
ASSEMBLING AND PREPARING
Setting up the Monitor set
ENGLISH ENG
Detaching the Stand Base
1 Place the Monitor set with the screen side
down on a flat and cushioned surface.
Attaching the Stand Base
1 Place the Monitor set with the screen side
down on a flat and cushioned surface.
CAUTION
Lay a foam mat or soft protective cloth on the surface to protect the screen from damage.
2 Turn the screw to the left, and then pull out the
Stand Base from the Stand Body.
2 Attach the Stand Base and then tighten the
screw to the right with a Coin.
Stand Base
Stand Base
CAUTION
y This illustration depicts the general model of connection. [. . . ] y HDMI: HDMI(Digital signal) input.
14
CUSTOMIZING SETTINGS
PICTURE
ENGLISH ENG
1 Press any button on the front of the Monitor set to display
the MONITOR SETUP OSD menu. menu.
2 Press the MENU button to display the options in the OSD 3 Select PICTURE by pressing the buttons on the front of the
Monitor set and set the options.
4 Select EXIT to leave the OSD menu.
To return to the upper menu or set other menu items, use the up arrow ( ) button. The available picture settings are described below.
Menu BRIGHTNESS CONTRAST SHARPNESS BLACK LEVEL To adjust the brightness of the screen. If you select'HIGH', the screen will be bright and if you select `LOW', the screen will be dark. To minimize any vertical bars or stripes visible on the screen background. The horizontal screen size will also change. This item allows you to remove any horizontal noise and clear or sharpen the image of characters. To select the range of output image for DTV timing in HDMI input. (only for HDMI input)Recommend overscan function to turn on when connect AV equipment. Description
VOLUME
1 Press any button on the front of the Monitor set to display
the MONITOR SETUP OSD menu. menu.
2 Press the MENU button to display the options in the OSD 3 Select VOLUME by pressing the buttons on the front of the
Monitor set and set the options.
4 Select EXIT to leave the OSD menu.
To return to the upper menu or set other menu items, use the up arrow ( ) button. The available picture settings are described below.
Menu VOLUME Description To adjust the volume of headphone/Earphone. (Only for HDMI input)
CUSTOMIZING SETTINGS
17
OTHERS ENG ENGLISH
1 Press any button on the front of the Monitor set to display the
MONITOR SETUP OSD menu.
2 Press the MENU button to display the options in the OSD menu. 3 Select OTHERS by pressing the buttons on the front of the
Monitor set and set the options.
4 Select EXIT to leave the OSD menu.
To return to the upper menu or set other menu items, use the up arrow ( ) button. The available picture settings are described below.
Menu LANGUAGE POWER INDICATOR WHITE BALANCE Description To choose the language in which the control names are displayed. Use this function to set the power indicator on the front side of the monitor to ON or OFF. If you set OFF, it will go off. If you set ON at any time, the power indicator will automatically be turned on. If the output of the video card is different the required specifications, the color level may deteriorate due to video signal distortion. Using this function, the signal level is adjusted to fit into the standard output level of the video card in order to provide the optimal image. Activate this function when white and black colors are present in the screen. * This function works only if input resolution is lower than Monitor set ratio (16:9). SAVING ON Enables SUPER ENERGY SAVING you can save energy with this energy- efficient function OFF RESET FACTORY RESET Disables SUPER ENERGY SAVING. Resets the values of total energy consumption reduction and CO2 emission reduction estimates.
ORIGINAL RATIO WIDE
Restore all factory default settings except"LANGUAGE. " Press the immediately.
NOTE
y TOTAL POWER REDUCTION: How much power is saved while using the monitor. y SAVING DATA(W/h) 545 mm (21. 5 inch) 584 mm (23 inch) SUPER SAVING LED SAVING 4 W/h 15 W/h 5 W/h 12 W/h
y Saving Data depends on the Panel. y LG calculated these values by using "broadcast video signal". y LED Saving refers to how much power can be saved using a WLED Panel instead of CCFL panel. [. . . ] Have you installed the display driver?
y Be sure to install the display driver from the display driver CD (or diskette) that comes with your display. Or, you can also download the driver from our web site: http://www. lg. com. y Make sure to check if the video card supports Plug&Play function.
22
SPECIFICATIONS
SPECIFICATIONS
IPS225V
Display 54. 5 cm (21. 5 inch) Flat Panel Active matrix-TFT LCDAnti-Glare coating Visible diagonal size: 54. 5 cm Pixel Pitch 0. 247 mm x 0. 247 mm (Pixel Pitch) Sync Input Horizontal Frequency 30 kHz to 83 kHz (Automatic) Vertical Frequency 56Hz to 75Hz (D-SUB, DVI-D) 56Hz to 61Hz (HDMI) Input Form Separate Sync. Digital Video Input Signal Input 15 pin D-SUB Connector /DVI-D Connector (Digital) HDMI Connector Input Form RGB Analog (0. 7 Vp-p/ 75 ohm), Digital Resolution Max D-SUB(Analog) : 1920 x 1080 @ 60 Hz DVI / HDMI (Digital) : 1920 x 1080 @ 60 Hz Recommend VESA 1920 x 1080 @ 60 Hz Plug & Play DDC 2B(Analog, Digital, HDMI) Power Consumption On Mode : 31 W(Typ. ) SleepMode0. 3W OffMode0. 3W Power Input AC 100-240 V~ 50 / 60 Hz 1. 0A Dimensions With Stand 51. 3 cm x 39. 8 cm x 19. 1 cm (Width x Height x Depth) Without Stand 51. 3 cm x 31. 2 cm x 5. 9 cm Weight Tilt Range Environmental conditions 3. 2 kg -5° to 15° Operating Temperature 10°C to 35 °C Operating Humidity 10 % to 80 % Storage Temperature -20°C to 60 °C Storage Humidity 5 % to 90 % non-Condensing Attached ( ), Detached (O) Wall-outlet type Screen Type
ENGLISH ENG
Stand Base Power cord
Product specifications shown above may be changed without prior notice due to upgrade of product functions.
SPECIFICATIONS
23
SPECIFICATIONS
IPS235V
Display 58. 4 cm (23 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size: 58. 4 cm Pixel Pitch 0. 265 mm x 0. 265 mm (Pixel Pitch) Sync Input Horizontal Frequency 30 kHz to 83 kHz (Automatic) Vertical Frequency 56Hz to 75Hz (D-SUB, DVI-D) 56Hz to 61Hz (HDMI) Input Form Separate Sync. [. . . ]