[. . . ] After you select your desired paper output size, the copier/printer reduces or enlarges the image to fit onto the output paper.
Xerox DocuColor 2006
221
22. Copy Features
·
Preset % - The Preset % settings are shown on the Copier Control Panel. The copier/printer automatically determines output size based on the selected reduction or enlargement percentage. The following tables list the Preset % options available on the DocuColor 2006 and how each percentage affects certain paper sizes.
Percentage 64% 78% 129% 154% 200%
Paper Sizes 11 in x 17 in 8. 5 in x 11 in 8. 5 in x 14 in 8. 5 in x 11 in 8. 5 in x 11 in 11 in x 17 in 5. 5 in x 8. 5 in 8. 5 in x 14 in 5. 5 in x 8. 5 in 11 in x 17 in
Percentage 70 % 81% 86% 115% 141%
Paper Sizes A3 A4 B4 A4 A3 B4; A4 B5 B4 A3; B5 A4 B5 B4
U. S. [. . . ] Use the Arrow Buttons to highlight the paper size loaded in the Bypass Tray. The Bypass Tray, along with your selected copy stock, will display under the Paper Supply option. Enter the desired number of copies using the Numeric Keypad.
9.
10. Press the Start button.
Color Mode
The Color Mode feature allows you to define color specifications for your copy output. The following Color Mode options are available on the DocuColor 2006 copier/printer: · Auto The copier/printer automatically detects if the original is color or black and white. Documents that are detected as black and white are copied in Text mode. · Black The copier/printer uses only black dry ink to create the copy. The following original type options are available in Black color mode: · · · Text Use this setting when the original is black and white and contains only text. Text/Photo Use this setting when the original is black and white and contains both text and printed photographs. Photograph Use this setting when the original is a black and white photograph.
2212
Xerox DocuColor 2006
22. Copy Features
·
Color - The copier/printer will use all dry ink cartridges for full color copy output. Position the original on the Document Glass or in the Document Feeder.
For more information on positioning originals on the Document Glass and using the Document Feeder, go to the Basic Copying chapter. Use the Arrow Buttons to highlight On to activate the background suppression or to highlight Off to turn the background suppression off. Copy Features
Advanced Features
The Advanced Features option includes the following: · Output to change the tray that your copies output to. The option can be set to either the Exit Tray, the left-hand side output tray, or the Top Tray, the tray above the printer where print jobs are output. If the Sorter/Stacker option is attached, there are other output selections available. Refer to the section Determining Output with the optional Sorter/Stacker for additional information. Erase to set an erase value from 0 -- 50 mm for the following dimensions on your copy output: · · · Horizontal Vertical Center
·
·
The DocuColor 2006 copier/printer automatically creates a 4 mm border on every copy. · 2-Sided to produce double sided output, output with images on both the front and back sides, from single sided input. The following orientation options are available for the 2-Sided feature: · · · Portrait to have to images flip along the long edge of the output. Landscape to have the images flip along the short edge of the output.
2 Up to copy two images onto a single page. The following image positions are available for the 2 Up feature: · · ON (LR) to position the images in order from left to right. [. . . ] Long Edge Binding to flip the images along the long edge of the output. This option prints the top of the long edge side 1 image on the same edge of the page as the top of the side 2 image. Short Edge Binding to flip the images along the short edge of the output. This option prints the top of the side 1 short edge image on the opposite edge of the page from the top of the side 2 image. [. . . ]